NSN 69057D

An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes:straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.

9.000 millimeters nominal inside corner radius, unable to decode material, 0.266 inches nominal hole diameter, 0.031 inches nominal cross-sectional thickness, solid single or composition cross-sectional shape style.

NSN 5330-00-360-3966 Datasheet

(NSN) National Stock Number

5330-00-360-3966

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5330 - Packing and Gasket Materials

(NIIN) National Item Identification Number

00-360-3966

Requires Demilitarization

Yes

(INC) Item Name Code

04522

Date

Tue, Jan 1, 1963

Cross-Sectional Shape Style

solid single or composition

Cross-Sectional Thickness

0.031 inches nominal

Hole Diameter

0.266 inches nominal

Inside Corner Radius

9.000 millimeters nominal

Material

unable to decode

Overall Length

76.000 millimeters nominal

Overall Width

65.000 millimeters minimum

Surface Treatment

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9I - Defense industrial supply center philadelphia, pennsylvania 19111

Pseudo Item Name Code

0004522

Cross Reference

CAGE Codes

50309

John Reiner & Co. Inc.

U.s./canadian manufacturers

92679

Navistar Intl Corp Melrose Park Engine Plant Location /melrose Park/

U.s./canadian manufacturers

19207

U S Army Tank Automotive Command Amsta-Im-Mm

Government departments or units, including military organizations

56442

Diamond Reo Truck Co

U.s./canadian manufacturers

01843

Ambac International Corporation Div Ambac International

U.s./canadian manufacturers

16460

Marine Engine Specialties Div of Mesco Tectonics Inc

U.s./canadian manufacturers

19519

New Monarch Machine Tool, Inc. Dba New Monarch Machine Tool Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

95100

Water Commodity

596 - Gaskets, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

194120

Questions & Answers

1. What is the FSCG of the NSN 5330-00-360-3966?

   The FSCG of the NSN 5330-00-360-3966 is 5330

2. Does NSN 5330-00-360-3966 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5330-00-360-3966 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5330-00-360-3966 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5330-00-360-3966 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963