NSN 6962ED1903PC3A

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

unable to decode center to center distance between mounting facilities parallel to length, 1 coil quantity, unable to decode center to center distance between mounting facilities parallel to width, air arc quenching method, 45.392 cubic inches cubic measure.

NSN 5945-01-049-0366 Datasheet

(NSN) National Stock Number

5945-01-049-0366

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5945 - Relays and Solenoids

(NIIN) National Item Identification Number

01-049-0366

Requires Demilitarization

Yes

(INC) Item Name Code

32512

Date

Mon, Oct 10, 1977

Schedule B Code

8536490075

Arc Quenching Method

air

Center To Center Distance Between Mounting Facilities Parallel To Width

unable to decode

Center To Center Distance Between Mounting Facilities Parallel To Length

unable to decode

Coil Quantity

1

Cubic Measure

45.392 cubic inches

Duty Type

continuous

Environmental Protection

dustproof

Fragility Factor

moderately rugged

Frequency In Hertz

60.0 nominal

Main Contact Load Current Rating At Maximum Rated Voltage

Main Contact Maximum Voltage Rating In Volts

480.0 ac and 110.0 dc

Mounting Facility Pattern

unable to decode

Mounting Facility Type And Quantity

6 unthreaded hole(s) single mounting facility

Nonpile-Up Main Contact Arrangement

2 pole, double throw, one position momentary

Operating Voltage Rating And Type At Specified Temp

unable to decode

Overall Height

3.090 inches maximum

Overall Length

4.520 inches maximum

Overall Width

3.250 inches maximum

Purpose For Which Designed

general

Storage Type

general purpose warehouse

Terminal Type And Quantity

unable to decode

Time Delay

Unthreaded Mounting Hole Diameter

unable to decode

Winding Quantity

1

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0032512

Cross Reference

CAGE Codes

66935

Johnson Controls Navy Systems, Llc

U.s./canadian manufacturers

27192

Drs Naval Power Systems Inc Dba Drs Power & Control Technologies Inc

U.s./canadian manufacturers

89020

Te Connectivity Corporation

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-49-0075

Description

relays, electromechanical, for a voltage exceeding 60 v but not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77254

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5945-01-049-0366?

   The FSCG of the NSN 5945-01-049-0366 is 5945

2. Does the NSN 5945-01-049-0366 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536490075

3. Does NSN 5945-01-049-0366 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5945-01-049-0366 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5945-01-049-0366 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5945-01-049-0366 was assigned to the Federal Catalog?

   It was assigned 48 years ago, on Mon, Oct 10, 1977