NSN 698ED174-4

An item fabricated from electrically nonconductive material specifically designed to provide a support for mounting an electrical and/or an electronic component such as a semiconductor device, relay, or resistor into the next higher assembly. It isolates the component from the mounting surface of the next higher assembly, it may act as a strain relief to avoid damage to the component seal, and it may permit soldering of the component to the next higher assembly without damage. It includes holes, notches, or other provisions for physical alignment and spacing of electrical leads and/or other mounting facilities projecting from the component it mounts. It may also afford protection from shock or vibration. It may be either nonthermally conductive which protects the component from temperature changes in the next higher assembly or it may be thermally conductive which permits heat generated in the component to be drained out to a heat sink. For items whose function is electrical insulation only, see insulator, (as modified). Excludes:holder, (as modified); retainer, (as modified), and spacer, plate.

cutler-hammer controlling agency, 28-822-6 part no. and 28-822-2 part no. and 86-2427-3 part no. identifying number, plastic inclosure material, watertight environmental protection, 4 individual switch quantity.

NSN 5930-00-451-4043 Datasheet

(NSN) National Stock Number

5930-00-451-4043

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-451-4043

Requires Demilitarization

Yes

(INC) Item Name Code

00711

Date

Fri, May 14, 1971

Schedule B Code

8538907080

Controlling Agency

cutler-hammer

Environmental Protection

watertight

Identifying Number

28-822-6 part no. and 28-822-2 part no. and 86-2427-3 part no.

Inclosure Material

plastic

Individual Switch Quantity

4

Inclosure Type

fully inclosed

Mounting Configuration

four 0.281 in. dia mtg holes on 10.750 in. by 3.000 in. mtg centers

Mounting Method

flange and hole

Overall Height

3.680 inches nominal

Overall Length

11.500 inches nominal

Overall Width

3.760 inches nominal

Special Markings

power on; heater on; start; stop

Switch Type

push

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000711

Cross Reference

CAGE Codes

27192

Drs Naval Power Systems Inc Dba Drs Power & Control Technologies Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5930-00-451-4043?

   The FSCG of the NSN 5930-00-451-4043 is 5930

2. Does the NSN 5930-00-451-4043 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5930-00-451-4043 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-451-4043 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-451-4043 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-451-4043 was assigned to the Federal Catalog?

   It was assigned 55 years ago, on Fri, May 14, 1971