NSN 7-0053

A switch which is externally actuated by a thumbwheel and/or pushbutton. A legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. Electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. May have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing.

0.453 inches nominal distance between mounting surface and lower end, 3.234 inches minimum and 3.375 inches maximum body height, 2.094 inches nominal distance between centerlines of mounting facilities parallel to body length, discrimination at specified frequencies per function in decibels, 2.562 inches nominal body outside diameter.

NSN 5915-00-503-1746 Datasheet

(NSN) National Stock Number

5915-00-503-1746

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5915 - Filters and Networks

(NIIN) National Item Identification Number

00-503-1746

Requires Demilitarization

Yes

(INC) Item Name Code

00209

Date

Tue, Jan 1, 1963

Schedule B Code

8527995030

Body Height

3.234 inches minimum and 3.375 inches maximum

Body Outside Diameter

2.562 inches nominal

Discrimination At Specified Frequencies Per Function In Decibels

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

2.094 inches nominal

Distance Between Mounting Surface And Lower End

0.453 inches nominal

Frequency Band Width Per Function

1.03 kilohertz blank and 1.18 kilohertz blank

Functional Terminal Type And Quantity

unable to decode

Inclosure Type

hermetically sealed

Insertion Loss At Reference Frequency Per Function In Decibels

6.0 blank

Load Impedance Per Function

600.0 ohms blank

Mounting Facility Type And Quantity

4 unthreaded hole(s)

Overall Height

3.703 inches nominal

Overall Length

2.562 inches nominal

Overall Width

2.562 inches nominal

Reference Frequency Per Function

1.105 kilohertz blank

Source Impedance Rating Per Function

600.0 ohms blank

Specified Frequencies Of Discrimination Per Function

935.00 hertz blank and 1.03 kilohertz blank and 1.18 kilohertz blank and 1.275 kilohertz blank

Style Designator

round terminal/terminals on opposite surfaces

Unthreaded Mounting Hole Diameter

0.177 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000209

Cross Reference

CAGE Codes

14304

L3harris Technologies, Inc. Dba Harris Corp Div Harris Defense Communications

U.s./canadian manufacturers

0HBH2

Lexel Imaging Systems Inc

U.s./canadian manufacturers

15634

Magnetika Inc

U.s./canadian manufacturers

80223

United Transformer Corp Sub of Opt Industries Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8527-99-5030

Description

reception apparatus, nesoi

End Use

41210 - Stereo equipment, etc.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76289

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5915-00-503-1746?

   The FSCG of the NSN 5915-00-503-1746 is 5915

2. Does the NSN 5915-00-503-1746 have a Schedule B code assigned?

   Yes, the Schedule B code is 8527995030

3. Does NSN 5915-00-503-1746 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5915-00-503-1746 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5915-00-503-1746 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5915-00-503-1746 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963