NSN 700B115

A washer of any peripheral shape having a centrally located hole. Both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. The thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. The maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. Excludes:washer, concave, retainer, packing, and thrust type washers. See also spacer, sleeve; and spacer, stepped.

110.0 ac at sea level contact voltage rating in volts, 15.0 dc at sea level contact voltage rating in volts, 150.0 milliamperes resistive load ac at sea level contact load current rating, 5 individual section quantity, 2.0 milliamperes resistive load dc at sea level contact load current rating.

NSN 5930-00-830-8205 Datasheet

(NSN) National Stock Number

5930-00-830-8205

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-830-8205

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Mon, Jan 1, 1962

Schedule B Code

8536509020

Contact Load Current Rating

150.0 milliamperes resistive load ac at sea level

Contact Load Current Rating

2.0 milliamperes resistive load dc at sea level

Contact Voltage Rating In Volts

110.0 ac at sea level

Contact Voltage Rating In Volts

15.0 dc at sea level

Individual Section Quantity

5

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Pole Quantity

1 first section rear

Shaft Diameter

0.250 inches nominal single actuator

Shaft Type

round single actuator

Shaft Length

0.750 inches nominal single actuator

Switch Actuator Indexing Position Quantity

12 single actuator

Switch Actuator Positioning Increment

30.0 degrees single actuator

Switch Contact Basic Design

nonpile-up symmetrical and nonpile-up nonsymmetrical

Terminal Type

tab, solder lug

Special Features

terminals front insulated from terminals on rear of sections

Thread Length

0.375 inches nominal single mounting facility

Thread Series Designator

unef single mounting facility

Throw Quantity

11 first section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

53110

Viasys Respiratory Care Inc. Dba Biosys Healthcare

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-830-8205?

   The FSCG of the NSN 5930-00-830-8205 is 5930

2. Does the NSN 5930-00-830-8205 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-00-830-8205 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-830-8205 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-830-8205 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-830-8205 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962