NSN 7010388371

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

plain removable backing surface condition, 36.000 yards nominal length, plastic polyurethane material, clear color, abrasion and solvent resistant,acrylic adhesive special features.

NSN 9330-01-288-6989 Datasheet

(NSN) National Stock Number

9330-01-288-6989

(FSG) Federal Supply Group

93 - Nonmetallic Fabricated Materials

(FSC) Federal Supply Classification

9330 - Plastics Fabricated Materials

(NIIN) National Item Identification Number

01-288-6989

Requires Demilitarization

Yes

(INC) Item Name Code

21952

Date

Fri, Nov 11, 1988

Schedule B Code

3919905060

Color

clear

Length

36.000 yards nominal

Material

plastic polyurethane

Special Features

abrasion and solvent resistant,acrylic adhesive

Removable Backing Surface Condition

plain

Removable Backing Type

paper

Thickness

0.012 inches nominal

Width

48.000 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0021952

Cross Reference

CAGE Codes

76381

3m Company

U.s./canadian manufacturers

52152

3m Company Div Industrial Adhesives and Tapes Div

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

77835

Water Commodity

845 - Plastic fabricated materials incl containers, pallets, sheets and other plastic material

National Motor Freight Classification Item Number

156830

Schedule B & Trade

Schedule B

3919-90-5060

Description

self-adhesive plates, sheets, film, foil, tape, strip & other flat shapes of plastics, whether or not in rolls, nesoi

End Use

12770 - Other industrial supplies

Unit of Quantity

M2

USDA

Yes

(SITC) Standard International Trade Classification

58219

(NAICS) North American Industrial Classification System

322220

Questions & Answers

1. What is the FSCG of the NSN 9330-01-288-6989?

   The FSCG of the NSN 9330-01-288-6989 is 9330

2. Does the NSN 9330-01-288-6989 have a Schedule B code assigned?

   Yes, the Schedule B code is 3919905060

3. Does NSN 9330-01-288-6989 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 9330-01-288-6989 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 9330-01-288-6989 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 9330-01-288-6989 was assigned to the Federal Catalog?

   It was assigned 37 years ago, on Fri, Nov 11, 1988