NSN 70A0761

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

runway status lights (rwsl) end item identification, wye, connector part name assigned by controlling agency.

NSN 5975-01-620-0432 Datasheet

(NSN) National Stock Number

5975-01-620-0432

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5975 - Electrical Hardware and Supplies

(NIIN) National Item Identification Number

01-620-0432

Requires Demilitarization

Yes

(INC) Item Name Code

10234

Date

Thu, Jun 27, 2013

End Item Identification

runway status lights (rwsl)

Part Name Assigned By Controlling Agency

wye, connector

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0010234

Cross Reference

CAGE Codes

5ED70

Adb Safegate Americas Llc

U.s./canadian manufacturers

1EG52

Saab, Inc Div Surveillance

U.s./canadian manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 5975-01-620-0432?

   The FSCG of the NSN 5975-01-620-0432 is 5975

2. Does NSN 5975-01-620-0432 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5975-01-620-0432 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5975-01-620-0432 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5975-01-620-0432 was assigned to the Federal Catalog?

   It was assigned 13 years ago, on Thu, Jun 27, 2013