NSN 70A317

A resilient metal item, circular or nearly circular, which is designed to be inserted into an internal or external groove and retained by its own spring action, or it may have external prongs or projections designed to be inserted into a hole and retained by spring action of the prongs which grip by imbedding into the material. For items having internal prongs which perform the same function, see push on nut. It is used to keep and/or lock a part(s) in position, as a ball bearing on a shaft or in a housing. See also clip, retaining and pin, lock. Excludes:ring, connecting, round.

deactuation point adjustable and actuation point adjustable contact adjustability, +0.60 to 22.00 actuation point pounds per square inch and +0.40 to 20.00 deactuation point pounds per square inch contact adjustment range, increase contact action stimulus, internal deactuation point screw and internal actuation point hex nut contact adjustment type, 2.750 inches nominal body height.

NSN 5930-00-412-0279 Datasheet

(NSN) National Stock Number

5930-00-412-0279

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-412-0279

Requires Demilitarization

Yes

(INC) Item Name Code

00206

Date

Sat, Jan 22, 1972

Schedule B Code

8536509065

Body Height

2.750 inches nominal

Contact Action Stimulus

increase

Contact Adjustability

deactuation point adjustable and actuation point adjustable

Contact Adjustment Range

+0.60 to 22.00 actuation point pounds per square inch and +0.40 to 20.00 deactuation point pounds per square inch

Contact Adjustment Type

internal deactuation point screw and internal actuation point hex nut

Contact Load Current Rating

unable to decode

Contact Voltage Rating In Volts

unable to decode

Frequency In Hertz

unable to decode

Hazardous Locations/Environmental Protection

watertight

Inside Diameter

unable to decode

Longest Horizontal Distance Between Mounting Centers

3.250 inches nominal

Longest Vertical Distance Between Mounting Centers

3.312 inches nominal

Media For Which Designed

gas

Mounting Facility Pattern

isosceles triangle

Mounting Method

bracket(s) and unthreaded hole(s)

Nominal Thread Size

unable to decode

Nonpile-Up Contact Arrangement

1 pole, double throw, one position momentary

Overall Height

5.750 inches nominal

Overall Length

4.000 inches nominal

Overall Width

2.312 inches nominal

Pressure Connector Type

unable to decode

Pressure Switch Type

gage

Proof Pressure

80.00 pounds per square inch

Shortest Horizontal Distance Between Mounting Centers

1.625 inches nominal

Style Designator

rectangular

Terminal Type

screw

Thread Quantity Per Inch

unable to decode

Thread Series Designator

unable to decode

Unthreaded Mounting Hole Diameter

0.203 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000206

Cross Reference

CAGE Codes

76371

Mechanical Equipment Company, Inc. Dba Mechanical Equipment Co Inc

U.s./canadian manufacturers

38056

Ashcroft Inc Dba Heise

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9065

Description

switches, for a voltage not exceeding 1000 volts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-412-0279?

   The FSCG of the NSN 5930-00-412-0279 is 5930

2. Does the NSN 5930-00-412-0279 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509065

3. Does NSN 5930-00-412-0279 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-412-0279 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-412-0279 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-412-0279 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Sat, Jan 22, 1972