NSN 7101AB

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

natural single actuator actuator color, round actuator style, 0.105 inches nominal actuator diameter, left position maintained and right position maintained actuator position-action relationship, 0.270 inches nominal actuator height.

NSN 5930-01-003-2478 Datasheet

(NSN) National Stock Number

5930-01-003-2478

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-003-2478

Requires Demilitarization

Yes

(INC) Item Name Code

00184

Date

Wed, Apr 16, 1975

Schedule B Code

8536509065

Actuator Height

0.270 inches nominal

Actuator Color

natural single actuator

Actuator Diameter

0.105 inches nominal

Actuator Position-Action Relationship

left position maintained and right position maintained

Actuator Style

round

Body Height

0.673 inches nominal

Body Length

0.500 inches nominal

Body Width

0.270 inches nominal

Body Style

printed circuit

Bushing Length

0.280 inches nominal

Center To Center Distance Between Mounting Support And Nearest Terminal

0.540 inches nominal

Contact Load Current Rating At Maximum Rated Voltage

2.000 amperes resistive dc and 2.000 amperes resistive ac

Inclosure Type

fully inclosed

Material

plastic case

Maximum Voltage Rating In Volts

250.0 ac and 28.0 dc

Mounting Method

terminal

Nonpile-Up Contact Arrangement

1 pole, double throw, both positions maintained single switch unit

Overall Height

1.075 inches minimum and 1.105 inches maximum

Overall Length

0.500 inches nominal

Overall Width

0.270 inches nominal

Precious Material And Location

contact and terminal surfaces gold

Terminal Type And Quantity

3 printed circuit

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000184

Cross Reference

CAGE Codes

97403

Cecom Lr Center

U.s./canadian manufacturers

09353

C and K Components Inc

U.s./canadian manufacturers

63HW9

C & K Components, Llc Div C & K Components

U.s./canadian manufacturers

80063

Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9065

Description

switches, for a voltage not exceeding 1000 volts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-003-2478?

   The FSCG of the NSN 5930-01-003-2478 is 5930

2. Does the NSN 5930-01-003-2478 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509065

3. Does NSN 5930-01-003-2478 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-003-2478 contain precious materials?

   Item contains gold.

5. Does NSN 5930-01-003-2478 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-003-2478 was assigned to the Federal Catalog?

   It was assigned 51 years ago, on Wed, Apr 16, 1975