NSN 7101PHE

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

round actuator style, up position maintained and down position maintained and center position maintained actuator position-action relationship, 0.115 inches nominal actuator diameter, 0.410 inches nominal actuator height, 0.500 inches nominal body length.

NSN 5930-01-039-3157 Datasheet

(NSN) National Stock Number

5930-01-039-3157

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-039-3157

Requires Demilitarization

Yes

(INC) Item Name Code

00184

Date

Sun, Apr 17, 1977

Schedule B Code

8536509065

Actuator Height

0.410 inches nominal

Actuator Diameter

0.115 inches nominal

Actuator Position-Action Relationship

up position maintained and down position maintained and center position maintained

Actuator Style

round

Body Length

0.500 inches nominal

Body Width

0.270 inches nominal

Body Style

bushing mount

Bushing Length

0.350 inches nominal

Contact Load Current Rating At Maximum Rated Voltage

2.000 amperes resistive dc and 2.000 amperes resistive ac

Inclosure Type

fully inclosed

Maximum Voltage Rating In Volts

250.0 ac and 28.0 dc

Mounting Method

unthreaded bushing

Mounting Surface To Terminal End Distance

0.505 inches nominal

Nominal Thread Size

0.250 inches

Nonpile-Up Contact Arrangement

1 pole, double throw, both positions maintained single switch unit

Precious Material And Location

terminals silver

Terminal Type And Quantity

3 tab, solder lug

Thread Quantity Per Inch

40

Thread Series Designator

uns

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000184

Cross Reference

CAGE Codes

09353

C and K Components Inc

U.s./canadian manufacturers

63HW9

C & K Components, Llc Div C & K Components

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9065

Description

switches, for a voltage not exceeding 1000 volts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-039-3157?

   The FSCG of the NSN 5930-01-039-3157 is 5930

2. Does the NSN 5930-01-039-3157 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509065

3. Does NSN 5930-01-039-3157 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-039-3157 contain precious materials?

   Item contains silver.

5. Does NSN 5930-01-039-3157 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-039-3157 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Sun, Apr 17, 1977