NSN 7101SYPC

An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes:straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.

round actuator style, up position maintained and down position maintained actuator position-action relationship, 0.342 inches minimum and 0.358 inches maximum body height, 0.395 inches minimum and 0.425 inches maximum actuator height, 0.114 inches minimum and 0.116 inches maximum actuator diameter.

NSN 5930-01-019-5266 Datasheet

(NSN) National Stock Number

5930-01-019-5266

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-019-5266

Requires Demilitarization

Yes

(INC) Item Name Code

00184

Date

Fri, Apr 16, 1976

Schedule B Code

8536509065

Actuator Height

0.395 inches minimum and 0.425 inches maximum

Actuator Diameter

0.114 inches minimum and 0.116 inches maximum

Actuator Position-Action Relationship

up position maintained and down position maintained

Actuator Style

round

Body Height

0.342 inches minimum and 0.358 inches maximum

Body Length

0.500 inches nominal

Body Width

0.270 inches nominal

Body Style

bushing mount

Bushing Length

0.345 inches minimum and 0.355 inches maximum

Contact Load Current Rating At Maximum Rated Voltage

5.000 amperes resistive dc and 2.000 amperes resistive ac

Hazardous Locations/Environmental Protection

dustproof

Inclosure Type

fully inclosed

Material

plastic case

Maximum Voltage Rating In Volts

250.0 ac and 28.0 dc

Mounting Method

threaded bushing

Nominal Thread Size

0.250 inches

Nonpile-Up Contact Arrangement

1 pole, double throw, both positions maintained single switch unit

Terminal Type And Quantity

3 printed circuit

Thread Quantity Per Inch

40

Thread Series Designator

uns

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000184

Cross Reference

CAGE Codes

09353

C and K Components Inc

U.s./canadian manufacturers

63HW9

C & K Components, Llc Div C & K Components

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9065

Description

switches, for a voltage not exceeding 1000 volts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-019-5266?

   The FSCG of the NSN 5930-01-019-5266 is 5930

2. Does the NSN 5930-01-019-5266 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509065

3. Does NSN 5930-01-019-5266 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-019-5266 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-01-019-5266 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-019-5266 was assigned to the Federal Catalog?

   It was assigned 50 years ago, on Fri, Apr 16, 1976