NSN 714398-2

An item fabricated from electrically nonconductive material specifically designed to provide a support for mounting an electrical and/or an electronic component such as a semiconductor device, relay, or resistor into the next higher assembly. It isolates the component from the mounting surface of the next higher assembly, it may act as a strain relief to avoid damage to the component seal, and it may permit soldering of the component to the next higher assembly without damage. It includes holes, notches, or other provisions for physical alignment and spacing of electrical leads and/or other mounting facilities projecting from the component it mounts. It may also afford protection from shock or vibration. It may be either nonthermally conductive which protects the component from temperature changes in the next higher assembly or it may be thermally conductive which permits heat generated in the component to be drained out to a heat sink. For items whose function is electrical insulation only, see insulator, (as modified). Excludes:holder, (as modified); retainer, (as modified), and spacer, plate.

0.032 inches nominal cross-sectional height, 0.719 inches nominal center to center distance between bolt holes along width, 0.750 inches nominal aperture diameter, 4 bolt hole quantity, 0.719 inches nominal center to center distance between bolt holes along length.

NSN 5999-00-618-9336 Datasheet

(NSN) National Stock Number

5999-00-618-9336

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5999 - Miscellaneous Electrical and Electronic Components

(NIIN) National Item Identification Number

00-618-9336

Requires Demilitarization

Yes

(INC) Item Name Code

20281

Date

Thu, Feb 20, 1975

Schedule B Code

8543909000

Aperture Diameter

0.750 inches nominal

Bolt Hole Quantity

4

Center To Center Distance Between Bolt Holes Along Length

0.719 inches nominal

Center To Center Distance Between Bolt Holes Along Width

0.719 inches nominal

Cross-Sectional Height

0.032 inches nominal

Cross-Sectional Shape Style

emi

Environmental Protection Material Location

throughout rf shielding gasket

Hole Diameter

0.141 inches nominal

Material Document And Classification

unable to decode

Material

unable to decode

Outside Corner Radius

0.160 inches nominal

Outside Edge To Bolt Hole Center Distance Along Width

0.123 inches nominal

Outside Edge To Bolt Hole Center Distance Along Length

0.123 inches nominal

Overall Length

0.965 inches nominal

Overall Width

0.965 inches nominal

Precious Material And Location

emi/rfi conductive particles silver

Precious Material

silver

Style Designator

non-circular

Surface Treatment

unable to decode

Temp Rating

-45.0 celsius and 125.0 celsius

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020281

Cross Reference

CAGE Codes

18876

Us Army Aviation and Missile Command

Government departments or units, including military organizations

02227

Naval Electronic Systems Security Engineering Center

U.s./canadian manufacturers

53711

Naval Sea Systems Command

U.s./canadian manufacturers

18565

Parker-Hannifin Corporation Dba Pneutronics Div Chomerics Division

U.s./canadian manufacturers

U4299

Parker Hannifin Ltd (chomerics Division)

Non-us manufacturer (nato), other foreign organization or codification bureaus

13499

Rockwell Collins, Inc. Dba Collins Aerospace Government Systems Div Collins Aerospace - Government Systems

U.s./canadian manufacturers

78574

Sterling Abrasive Pproducts Co

U.s./canadian manufacturers

16236

Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)

Government departments or units, including military organizations

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35070

Water Commodity

723 - Radio parts and equipment, excluding tubes packed separately

National Motor Freight Classification Item Number

062800

Schedule B & Trade

Schedule B

8543-90-9000

Description

electrical machines and apparatus parts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77879

(NAICS) North American Industrial Classification System

335999

Questions & Answers

1. What is the FSCG of the NSN 5999-00-618-9336?

   The FSCG of the NSN 5999-00-618-9336 is 5999

2. Does the NSN 5999-00-618-9336 have a Schedule B code assigned?

   Yes, the Schedule B code is 8543909000

3. Does NSN 5999-00-618-9336 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5999-00-618-9336 contain precious materials?

   Item contains silver.

5. Does NSN 5999-00-618-9336 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5999-00-618-9336 was assigned to the Federal Catalog?

   It was assigned 51 years ago, on Thu, Feb 20, 1975