NSN 7170K11

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

0.121 cubic inches cubic measure, continuous duty type, dustproof environmental protection, air arc quenching method, 1 coil quantity.

NSN 5945-01-252-7786 Datasheet

(NSN) National Stock Number

5945-01-252-7786

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5945 - Relays and Solenoids

(NIIN) National Item Identification Number

01-252-7786

Requires Demilitarization

Yes

(INC) Item Name Code

32512

Date

Wed, Apr 8, 1987

Schedule B Code

8536490050

Arc Quenching Method

air

Coil Quantity

1

Cubic Measure

0.121 cubic inches

Duty Type

continuous

Environmental Protection

dustproof

Fragility Factor

moderately rugged

Main Contact Load Current Rating At Maximum Rated Voltage

unable to decode

Main Contact Maximum Voltage Rating In Volts

115.0 ac

Material

plastic case

Mounting Facility Type And Quantity

1 plug-in terminal(s) single mounting facility

Nonpile-Up Main Contact Arrangement

2 pole, double throw, one position momentary

Operating Voltage Rating And Type At Specified Temp

unable to decode

Overall Height

1.940 inches maximum

Overall Length

0.250 inches maximum

Overall Width

0.250 inches maximum

Purpose For Which Designed

general

Storage Type

general purpose warehouse

Terminal Type And Quantity

unable to decode

Winding Dc Resistance Rating

unable to decode

Winding Quantity

1

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0032512

Cross Reference

CAGE Codes

39428

Mcmaster-Carr Supply Co

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-49-0050

Description

relays, electromechanical, with contacts rated at less than 10 a, for a voltage exceeding 60 v but not exceeding 1000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77254

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5945-01-252-7786?

   The FSCG of the NSN 5945-01-252-7786 is 5945

2. Does the NSN 5945-01-252-7786 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536490050

3. Does NSN 5945-01-252-7786 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5945-01-252-7786 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5945-01-252-7786 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5945-01-252-7786 was assigned to the Federal Catalog?

   It was assigned 39 years ago, on Wed, Apr 8, 1987