NSN 719B791A17

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

control-indicator,general status; litton systems inc. model 792550 end item identification, 3.346 inches minimum and 3.406 inches maximum center to center distance between mounting facilities parallel to width, white single indicator single range background color, 3.346 inches minimum and 3.406 inches maximum center to center distance between mounting facilities parallel to length, unable to decode accuracy in percent.

NSN 6625-01-024-9284 Datasheet

(NSN) National Stock Number

6625-01-024-9284

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6625 - Electrical and Electronic Properties Measuring and Testing Instruments

(NIIN) National Item Identification Number

01-024-9284

Requires Demilitarization

Yes

(INC) Item Name Code

16450

Date

Thu, Jul 22, 1976

Schedule B Code

9030908030

End Item Identification

control-indicator,general status; litton systems inc. model 792550

Accuracy In Percent

unable to decode

Background Color

white single indicator single range

Center To Center Distance Between Mounting Facilities Parallel To Width

3.346 inches minimum and 3.406 inches maximum

Center To Center Distance Between Mounting Facilities Parallel To Length

3.346 inches minimum and 3.406 inches maximum

Circuit Attachment Method And Quantity

2 threaded stud

Circuit Construction Type

nonelectronic

Circuit Current For Which Designed

dc

Dial Scale Marking Color

unable to decode

Environmental Protection

cold resistant and corrosion resistant and heat resistant and humidity resistant and shock resistant and vibration resistant

Features Provided

magnetic shield and zero adjuster

Fsc Application Data

test set,elect. equip.

Furnished Items And Quantity

nut 8; washer 6

Indicator Type

dial w/pointer

Installation Design

panel

Measurement Range

unable to decode

Meter Body Diameter Behind Mounting Flange

3.980 inches maximum

Meter Depth Behind Mounting Flange

6.320 inches maximum

Mounting Arrangement Style

four hole/stud rectangular/square

Mounting Facility Type And Quantity

4 screw and 4 unthreaded hole(s)

Mounting Hole Diameter

0.311 inches minimum and 0.318 inches maximum

Movement Suspension Method

jewel pivot base

Movement Type

moving coil, permanent magnet

Nuclear Hardness Critical Feature

nonhardened

Overall Height

4.250 inches minimum and 4.750 inches maximum

Overall Length

7.039 inches maximum

Overall Width

4.250 inches minimum and 4.750 inches maximum

Panel For Which Designed

nonmagnetic

Pointer Color

unable to decode

Power Source

external

Scale Division Quantity

unable to decode

Scale Graduation Type

unable to decode

Scale Selection Method

terminal

Sensitivity Rating

10.0 volts

Special Features

ruggedized

Special Markings

red line at 2400 amperes

Special Test Features

environmental requirements per mil-m-16034

Style Designator

rectangular flush mtg

Supplementary Features

ambient pressure: 27.5 plus or minus 3.5 inches of mercury; impedance: 1000 ohms per volt

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0016450

Cross Reference

CAGE Codes

60336

Yokogawa Corporation of America

Non-manufacturers

29834

General Electric Co Instrument Products Section

U.s./canadian manufacturers

88416

Hughes Corp

U.s./canadian manufacturers

06481

Northrop Grumman Systems Corporation Div the Navigation, Targeting and Survivability Division

U.s./canadian manufacturers

0BZM1

Mkc Electronics Inc Dba Mk Electronics Div Mkc Electronics Inc, Dba Mk Electronics

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

H - 110.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

00000

Water Commodity

657 - Instruments, electric meter

National Motor Freight Classification Item Number

136750

Schedule B & Trade

Schedule B

9030-90-8030

Description

parts and accessories of articles of schedule b subheading 9030.39

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

87479

(NAICS) North American Industrial Classification System

334515

Questions & Answers

1. What is the FSCG of the NSN 6625-01-024-9284?

   The FSCG of the NSN 6625-01-024-9284 is 6625

2. Does the NSN 6625-01-024-9284 have a Schedule B code assigned?

   Yes, the Schedule B code is 9030908030

3. Does NSN 6625-01-024-9284 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6625-01-024-9284 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6625-01-024-9284 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6625-01-024-9284 was assigned to the Federal Catalog?

   It was assigned 50 years ago, on Thu, Jul 22, 1976