NSN 72015K129

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

single pole type body style, 15.0 amperes ac single location maximum continuous load current rating per pole, medium mine protected vehicle - mmpv end item identification, 2 threaded hole(s) mounting facility type and quantity, 1 toggle manual actuator type and quantity.

NSN 5925-01-664-6768 Datasheet

(NSN) National Stock Number

5925-01-664-6768

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

01-664-6768

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Thu, Jun 29, 2017

Schedule B Code

8536200040

End Item Identification

medium mine protected vehicle - mmpv

Body Style

single pole type

Manual Actuator Type And Quantity

1 toggle

Maximum Continuous Load Current Rating Per Pole

15.0 amperes ac single location

Mounting Facility Type And Quantity

2 threaded hole(s)

Mounting Slot Width

0.76 inches nominal

Nominal Thread Size

0.1875 inches

Operating Voltage Type And Rating Per Pole In Volts

250.0 ac single location

Part Name Assigned By Controlling Agency

breaker,high-temp

Pole Quantity

1

Reset Method

manual

Terminal Type And Quantity

2 screw base

Thread Quantity Per Inch

32

Trip Release Method

magnetic single location

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

39428

Mcmaster-Carr Supply Co

Non-manufacturers

73559

Carling Technologies, Inc Dba Carlingswitch

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-01-664-6768?

   The FSCG of the NSN 5925-01-664-6768 is 5925

2. Does the NSN 5925-01-664-6768 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-01-664-6768 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-01-664-6768 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5925-01-664-6768 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-01-664-6768 was assigned to the Federal Catalog?

   It was assigned 9 years ago, on Thu, Jun 29, 2017