NSN 724591-2

An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes:straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.

0.410 inches maximum body length, w/o mtg facilities terminal(s) on one surface body style, 0.160 inches maximum body height, 0.410 inches maximum body width, 0.0476 microfarads single section capacitance value per section.

NSN 5910-01-413-5207 Datasheet

(NSN) National Stock Number

5910-01-413-5207

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-413-5207

Requires Demilitarization

Yes

(INC) Item Name Code

00007

Date

Tue, May 16, 1995

Schedule B Code

8532290040

Body Height

0.160 inches maximum

Body Length

0.410 inches maximum

Body Width

0.410 inches maximum

Body Style

w/o mtg facilities terminal(s) on one surface

Capacitance Value Per Section

0.0476 microfarads single section

Center To Center Distance Between Terminals Parallel To Length

0.300 inches nominal

Dissipation Factor At Reference Temp In Percent

1.000

Insulation Resistance At Maximum Operating Temp

10000.0 megohms

Insulation Resistance At Reference Temp

100000.0 megohms

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

100.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius

0.0 single section

Terminal Diameter

0.025 inches nominal

Terminal Length

1.000 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius

-30.0 to 30.0 single section

Tolerance Range Per Section

-1.00 to 1.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000007

Cross Reference

CAGE Codes

05869

Raytheon Company Div Rmd Strategic

U.s./canadian manufacturers

59942

Avx Filters Corporation

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-413-5207?

   The FSCG of the NSN 5910-01-413-5207 is 5910

2. Does the NSN 5910-01-413-5207 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-413-5207 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-413-5207 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-413-5207 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-413-5207 was assigned to the Federal Catalog?

   It was assigned 31 years ago, on Tue, May 16, 1995