NSN 732164-4

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

steel material, 0.013 inches minimum and 0.014 inches maximum thickness, ams 5519 assn std single material response material document and classification, 0.880 inches minimum and 0.900 inches maximum diameter.

NSN 5340-01-202-9795 Datasheet

(NSN) National Stock Number

5340-01-202-9795

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-202-9795

Requires Demilitarization

Yes

(INC) Item Name Code

16584

Date

Fri, Mar 8, 1985

Schedule B Code

7211900000

Diameter

0.880 inches minimum and 0.900 inches maximum

Material Document And Classification

ams 5519 assn std single material response

Material

steel

Thickness

0.013 inches minimum and 0.014 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0016584

Cross Reference

CAGE Codes

73030

Hamilton Sundstrand Corporation Dba Collins Aerospace

U.s./canadian manufacturers

Freight Information

Air Commodity

AZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

Q - 70.0

National Motor Freight Class Rating

Q - 70.0

Special Handling

Z - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Schedule B & Trade

Schedule B

7211-90-0000

Description

flat-rolled iron or nonalloy steel, less than 600mm wide, not clad, plated or coated, nesoi

End Use

12100 - Iron and steel mill products

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

67353

(NAICS) North American Industrial Classification System

331110

Questions & Answers

1. What is the FSCG of the NSN 5340-01-202-9795?

   The FSCG of the NSN 5340-01-202-9795 is 5340

2. Does the NSN 5340-01-202-9795 have a Schedule B code assigned?

   Yes, the Schedule B code is 7211900000

3. Does NSN 5340-01-202-9795 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-01-202-9795 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5340-01-202-9795 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-01-202-9795 was assigned to the Federal Catalog?

   It was assigned 41 years ago, on Fri, Mar 8, 1985