NSN 7348C001

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

hermetic environmental protection, unable to decode center to center distance between mounting facilities parallel to width, 1 coil quantity, continuous duty type, unable to decode center to center distance between mounting facilities parallel to length.

NSN 5945-00-331-1426 Datasheet

(NSN) National Stock Number

5945-00-331-1426

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5945 - Relays and Solenoids

(NIIN) National Item Identification Number

00-331-1426

Requires Demilitarization

Yes

(INC) Item Name Code

32512

Date

Tue, Jan 1, 1963

Schedule B Code

8536410020

Center To Center Distance Between Mounting Facilities Parallel To Width

unable to decode

Center To Center Distance Between Mounting Facilities Parallel To Length

unable to decode

Coil Quantity

1

Duty Type

continuous

Environmental Protection

hermetic

Main Contact Load Current Rating At Maximum Rated Voltage

unable to decode

Main Contact Maximum Voltage Rating In Volts

24.0 dc

Mounting Facility Pattern

unable to decode

Mounting Facility Type And Quantity

4 unthreaded hole(s) single mounting facility

Operating Voltage Rating And Type At Specified Temp

unable to decode

Overall Height

3.313 inches nominal

Overall Length

2.250 inches nominal

Overall Width

2.250 inches nominal

Terminal Type And Quantity

unable to decode

Unthreaded Mounting Hole Diameter

unable to decode

Winding Dc Resistance Rating

unable to decode

Winding Quantity

1

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0032512

Cross Reference

CAGE Codes

95692

Edo Artisan Inc

U.s./canadian manufacturers

64959

American Telephone and Telegraph Co

U.s./canadian manufacturers

02288

Allied Controls, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-41-0020

Description

relays, electromechanical, with contacts rated less than 10 a, for a voltage not exceeding 60 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77254

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5945-00-331-1426?

   The FSCG of the NSN 5945-00-331-1426 is 5945

2. Does the NSN 5945-00-331-1426 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536410020

3. Does NSN 5945-00-331-1426 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5945-00-331-1426 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5945-00-331-1426 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5945-00-331-1426 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963