NSN 7408679

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

consists of a 36 inch cable with connector coming from tester special features, pressure transducer test box part name assigned by controlling agency, single item w/housing enclosure feature, pressure transducer test type for which designed, type 8 b/j mod 3 periscope special tools i-level end item identification.

NSN 6625-01-539-5749 Datasheet

(NSN) National Stock Number

6625-01-539-5749

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6625 - Electrical and Electronic Properties Measuring and Testing Instruments

(NIIN) National Item Identification Number

01-539-5749

Requires Demilitarization

Yes

(INC) Item Name Code

61201

Date

Wed, Apr 26, 2006

Schedule B Code

9030908030

Enclosure Feature

single item w/housing

End Item Identification

type 8 b/j mod 3 periscope special tools i-level

Part Name Assigned By Controlling Agency

pressure transducer test box

Special Features

consists of a 36 inch cable with connector coming from tester

Test Type For Which Designed

pressure transducer

Identification

Demilitarization Code

B - Usml items - mutilation to the point of scrap required worldwide. (note 7).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0061201

Cross Reference

CAGE Codes

53711

Naval Sea Systems Command

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34580

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061700

Schedule B & Trade

Schedule B

9030-90-8030

Description

parts and accessories of articles of schedule b subheading 9030.39

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

87479

(NAICS) North American Industrial Classification System

334515

Questions & Answers

1. What is the FSCG of the NSN 6625-01-539-5749?

   The FSCG of the NSN 6625-01-539-5749 is 6625

2. Does the NSN 6625-01-539-5749 have a Schedule B code assigned?

   Yes, the Schedule B code is 9030908030

3. Does NSN 6625-01-539-5749 require demilitarization?

   Usml items - mutilation to the point of scrap required worldwide. (note 7).

4. Does NSN 6625-01-539-5749 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6625-01-539-5749 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6625-01-539-5749 was assigned to the Federal Catalog?

   It was assigned 20 years ago, on Wed, Apr 26, 2006