NSN 7415938P14

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

pin single end conductor accommodation type, 0.107 inches single end largest diameter, uninsulated electrical insulation feature, 0.046 inches major bushing length, 0.135 inches major bushing diameter.

NSN 5940-00-665-8968 Datasheet

(NSN) National Stock Number

5940-00-665-8968

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5940 - Terminal Strips, Terminals and Lugs

(NIIN) National Item Identification Number

00-665-8968

Requires Demilitarization

Yes

(INC) Item Name Code

00887

Date

Tue, Jan 1, 1963

Schedule B Code

8536904000

Conductor Accommodation Type

pin single end

Electrical Insulation Feature

uninsulated

Largest Diameter

0.107 inches single end

Major Bushing Diameter

0.135 inches

Major Bushing Length

0.046 inches

Material

copper alloy overall except insulation

Minor Bushing Diameter

0.107 inches

Minor Bushing Length

0.172 inches

Mounting Method Style

press fit

Overall Diameter

0.135 inches

Overall Height

0.485 inches

Special Features

basic shape style single ended tubular

Surface Treatment Document And Classification

finish f73c3b1,general elec. co mfr ref single treatment response overall except insulation single layer

Surface Treatment

solder overall except insulation single layer

Terminal Length

0.267 inches

Thru-Hole Diameter

0.062 inches

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

S9G - Defense supply center richmond, virginia 23297

Pseudo Item Name Code

0000887

Cross Reference

CAGE Codes

24446

General Electric Company

U.s./canadian manufacturers

24454

General Electric Co Electronic Components Division of Electronic Atomic and Defense Systems Group

U.s./canadian manufacturers

80249

Bae Systems Information and Electronic Systems Integration Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

W - Rating variable

Rail Variation

1

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-90-4000

Description

terminals, electrical splices and electrical couplings; wafer probers with a voltage not exceeding 1000 volts

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77259

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5940-00-665-8968?

   The FSCG of the NSN 5940-00-665-8968 is 5940

2. Does the NSN 5940-00-665-8968 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536904000

3. Does NSN 5940-00-665-8968 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5940-00-665-8968 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5940-00-665-8968 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5940-00-665-8968 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963