NSN 74202D

An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector or printed wiring board. It is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. Excludes:lampholder; jack,telephone; jack,tip; insert electrical connector; insert module,electrical connector; connector body (as modified) and socket,plug-in electronic components. See also wiring harness (as modified) and cable assembly (as modified). For items with termination wires of more than four inches in length, see lead assembly,electrical. For items without inserts, see shell,electrical connector.

600.0 ac at sea level contact voltage rating in volts, 30.0 amperes resistive load ac at sea level contact load current rating, breaks before makes each section rear contact switching action, 0.014 cubic inches cubic measure, used on switchboard ships service generator onboard 210 wmec a and b class c.g. vessels end item identification.

NSN 5930-01-233-2330 Datasheet

(NSN) National Stock Number

5930-01-233-2330

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-233-2330

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Wed, May 28, 1986

Schedule B Code

8536509025

Contact Load Current Rating

30.0 amperes resistive load ac at sea level

Contact Switching Action

breaks before makes each section rear

Contact Voltage Rating In Volts

600.0 ac at sea level

Cubic Measure

0.014 cubic inches

End Item Identification

used on switchboard ships service generator onboard 210 wmec a and b class c.g. vessels

Individual Section Quantity

2

Longest Horizontal Distance Between Mounting Centers

2.000 inches nominal single mounting facility

Longest Vertical Distance Between Mounting Centers

2.180 inches nominal single mounting facility

Mounting Facility Pattern

isosceles triangle single mounting facility

Mounting Method

threaded hole(s) single mounting facility

Nominal Thread Size

0.190 inches single mounting facility

Overall Height

2.910 inches nominal

Overall Length

5.340 inches nominal

Overall Width

2.810 inches nominal

Pole Quantity

2 each section rear

Shaft Length

2.440 inches nominal single actuator

Shaft Type

rectangular/square, threaded hole single actuator

Shortest Horizontal Distance Between Mounting Centers

1.000 inches nominal single mounting facility

Square Shaft Size

0.187 inches nominal single actuator

Style Designator

tap, circuit selector

Switch Actuator Indexing Position Quantity

3 single actuator

Switch Actuator Momentary Position

clockwise and counterclockwise single actuator

Switch Actuator Stop Device Type

adjustable stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab w/screw

Thread Class

2a single mounting facility

Thread Quantity Per Inch

32 single mounting facility

Thread Series Designator

unf single mounting facility

Throw Quantity

2 each section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

82121

Electro Switch Corp. Dba Electro Switch Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9025

Description

switches, rotary, rated at over 5 a, for a voltage not exceeding 1,000 volts

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-233-2330?

   The FSCG of the NSN 5930-01-233-2330 is 5930

2. Does the NSN 5930-01-233-2330 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509025

3. Does NSN 5930-01-233-2330 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-233-2330 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5930-01-233-2330 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-233-2330 was assigned to the Federal Catalog?

   It was assigned 40 years ago, on Wed, May 28, 1986