NSN 7527452

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

increase contact action stimulus, deactuation point not adjustable and actuation point not adjustable contact adjustability, unable to decode contact load current rating, 1.579 inches nominal body length, 175.00 actuation point nominal degrees fahrenheit and 145.00 deactuation point nominal degrees fahrenheit contact stimulus rating.

NSN 5930-00-752-7452 Datasheet

(NSN) National Stock Number

5930-00-752-7452

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-752-7452

Requires Demilitarization

Yes

(INC) Item Name Code

00451

Date

Mon, Jan 1, 1962

Schedule B Code

9032100000

Body Length

1.579 inches nominal

Contact Action Stimulus

increase

Contact Adjustability

deactuation point not adjustable and actuation point not adjustable

Contact Load Current Rating

unable to decode

Contact Stimulus Rating

175.00 actuation point nominal degrees fahrenheit and 145.00 deactuation point nominal degrees fahrenheit

Contact Voltage Rating In Volts

unable to decode

Features Provided

tamper proof cap

Media For Which Designed

liquid

Mounting Method

threaded bushing

Nominal Thread Size

unable to decode

Nonpile-Up Contact Arrangement

1 pole, single throw, normally open, momentary action

Overall Length

2.688 inches nominal

Style Designator

cylindrical w/flange

Temp Sensing Element Type

internal sensor

Terminal Type

screw

Thread Length

unable to decode

Thread Quantity Per Inch

unable to decode

Thread Series Designator

unable to decode

Width Across Flats

1.313 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000451

Cross Reference

CAGE Codes

19207

U S Army Tank Automotive Command Amsta-Im-Mm

Government departments or units, including military organizations

82647

Sensata Technologies, Inc. Div Sensata Attleboro

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

723 - Radio parts and equipment, excluding tubes packed separately

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

9032-10-0000

Description

thermostats

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

87461

(NAICS) North American Industrial Classification System

334512

Questions & Answers

1. What is the FSCG of the NSN 5930-00-752-7452?

   The FSCG of the NSN 5930-00-752-7452 is 5930

2. Does the NSN 5930-00-752-7452 have a Schedule B code assigned?

   Yes, the Schedule B code is 9032100000

3. Does NSN 5930-00-752-7452 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-752-7452 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-752-7452 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-752-7452 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962