NSN 7541452P1

A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (when the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see spacer, plate. Excludes:items with lubricating features, see bearing, sleeve and bushing, sleeve. See also bushing, tapered; spacer, ring; washer, flat; and washer, (as modified).

1 electronic, current controlled adjustment device type and quantity, printed circuit board application design, continuous attenuation variation method, irregular body style, 0.350 inches nominal center to center distance between mounting facilities parallel to length.

NSN 5985-01-059-2560 Datasheet

(NSN) National Stock Number

5985-01-059-2560

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

01-059-2560

Requires Demilitarization

Yes

(INC) Item Name Code

00838

Date

Sun, Apr 9, 1978

Schedule B Code

8529109000

Adjustment Device Type And Quantity

1 electronic, current controlled

Application Design

printed circuit board

Attenuation Variation Method

continuous

Body Style

irregular

Center To Center Distance Between Mounting Facilities Parallel To Length

0.350 inches nominal

Center To Center Distance Between Mounting Facilities Parallel To Height

0.250 inches nominal

Criticality Code Justification

feat

Frequency Range

15.000 megahertz minimum and 100.000 megahertz maximum

Fsc Application Data

antennas,waveguides,and related equipment

Impedance Rating In Ohms

50.0 input-output

Mounting Facility Pattern

four position rectangular

Mounting Facility Type And Quantity

4 terminal

Operating Temp Range

-65.0 to 85.0 celsius

Overall Height

0.547 inches minimum and 0.579 inches maximum

Overall Length

0.672 inches minimum and 0.704 inches maximum

Overall Width

0.640 inches minimum and 0.672 inches maximum

Special Features

weapon system essential

Terminal Type And Quantity

4 pin

Voltage Standing Wave Ratio

1.02

Identification

Demilitarization Code

D - Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000838

Cross Reference

CAGE Codes

99971

Lockheed Martin Corp Naval Electronics & Surveillance Systems

U.s./canadian manufacturers

29971

Smiths Interconnect Americas, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34580

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061700

Schedule B & Trade

Schedule B

8529-10-9000

Description

antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8524 to 8528, nesoi

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76493

(NAICS) North American Industrial Classification System

334220

Questions & Answers

1. What is the FSCG of the NSN 5985-01-059-2560?

   The FSCG of the NSN 5985-01-059-2560 is 5985

2. Does the NSN 5985-01-059-2560 have a Schedule B code assigned?

   Yes, the Schedule B code is 8529109000

3. Does NSN 5985-01-059-2560 require demilitarization?

   Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

4. Does NSN 5985-01-059-2560 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5985-01-059-2560 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-01-059-2560 was assigned to the Federal Catalog?

   It was assigned 48 years ago, on Sun, Apr 9, 1978