NSN 757C-30

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

round, terminal/terminals in opposite surface body style, 12.4 gigahertz attenuation accuracy reference frequency, n coaxial connector series designation, transmission line application design, -1.00 to 1.00 attenuation accuracy in decibels.

NSN 5985-00-236-4476 Datasheet

(NSN) National Stock Number

5985-00-236-4476

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

00-236-4476

Requires Demilitarization

Yes

(INC) Item Name Code

14224

Date

Mon, May 28, 1973

Schedule B Code

8529109000

Application Design

transmission line

Attenuation Accuracy In Decibels

-1.00 to 1.00

Attenuation Accuracy Reference Frequency

12.4 gigahertz

Body Style

round, terminal/terminals in opposite surface

Coaxial Connector Series Designation

n

Connection Type Per Function

female output and male input

Frequency Range

0.000 hertz minimum and 12.400 gigahertz maximum

Fsc Application Data

antennas,waveguides,and related equipment

Input Impedance Rating In Ohms

50.0

Material

unable to decode

Mounting Method

connector

Operating Temp Range

-55.0 to 85.0 celsius

Output Impedance Rating In Ohms

50.0

Overall Diameter

0.812 inches nominal

Overall Length

2.660 inches nominal

Power Rating

2.0 watts average and 300.0 watts peak

Rf Signal Attenuation In Decibels

30.0

Terminal Type And Quantity

2 connector

Unpackaged Unit Weight

2.400 ounces

Voltage Standing Wave Ratio

1.20 and 1.25

Voltage Standing Wave Ratio Frequency Range

+0.0 to 6.0 gigahertz and +6.0 to 12.4 gigahertz

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0014224

Cross Reference

CAGE Codes

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

99899

Narda Holdings, Inc. Dba Narda-Miteq Div Narda-Miteq

U.s./canadian manufacturers

52335

Dal-Tech Devices, Inc. Dba Dal-Tech Devices Inc Div Dal-Tec Devices, Inc

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

06330

Water Commodity

723 - Radio parts and equipment, excluding tubes packed separately

National Motor Freight Classification Item Number

060535

Schedule B & Trade

Schedule B

8529-10-9000

Description

antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8524 to 8528, nesoi

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76493

(NAICS) North American Industrial Classification System

334220

Questions & Answers

1. What is the FSCG of the NSN 5985-00-236-4476?

   The FSCG of the NSN 5985-00-236-4476 is 5985

2. Does the NSN 5985-00-236-4476 have a Schedule B code assigned?

   Yes, the Schedule B code is 8529109000

3. Does NSN 5985-00-236-4476 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 5985-00-236-4476 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5985-00-236-4476 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-00-236-4476 was assigned to the Federal Catalog?

   It was assigned 53 years ago, on Mon, May 28, 1973