NSN 7580A

An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. Excludes:bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.

plotter is a microprocessor controlled plotter providing graphic displays of computer program output data; is equipped with capabilities as point digitizing,labeling,axes generation and automatic pen selection; power rqmts source: 100 v,120 v,220 v,240 v; frequency 48-66 hz,single phase,consumption: 170 watt max; operating temp: 0 deg to 55 deg c; 46.800 in. h,42.800 in. w,21.900 in. d; incorporates a low inertia dc servo motor drive system general characteristics item description.

NSN 6675-01-183-8098 Datasheet

(NSN) National Stock Number

6675-01-183-8098

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6675 - Mapping Instruments, Surveying and Drafting

(NIIN) National Item Identification Number

01-183-8098

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Tue, Jul 10, 1984

Schedule B Code

8542310000

General Characteristics Item Description

plotter is a microprocessor controlled plotter providing graphic displays of computer program output data; is equipped with capabilities as point digitizing,labeling,axes generation and automatic pen selection; power rqmts source: 100 v,120 v,220 v,240 v; frequency 48-66 hz,single phase,consumption: 170 watt max; operating temp: 0 deg to 55 deg c; 46.800 in. h,42.800 in. w,21.900 in. d; incorporates a low inertia dc servo motor drive system

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1433721

Cross Reference

CAGE Codes

28480

Hewlett-Packard Company Dba Hp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

F - 150.0

National Motor Freight Class Rating

F - 150.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

33170

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

058240

Questions & Answers

1. What is the FSCG of the NSN 6675-01-183-8098?

   The FSCG of the NSN 6675-01-183-8098 is 6675

2. Does the NSN 6675-01-183-8098 have a Schedule B code assigned?

   Yes, the Schedule B code is 8542310000

3. Does NSN 6675-01-183-8098 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6675-01-183-8098 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6675-01-183-8098 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6675-01-183-8098 was assigned to the Federal Catalog?

   It was assigned 42 years ago, on Tue, Jul 10, 1984