NSN 75965

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

aircraft support end item identification, fuselage section part name assigned by controlling agency.

NSN 1560-01-692-5791 Datasheet

(NSN) National Stock Number

1560-01-692-5791

(FSG) Federal Supply Group

15 - Aerospace Craft and Structural Components

(FSC) Federal Supply Classification

1560 - Airframe Structural Components

(NIIN) National Item Identification Number

01-692-5791

Requires Demilitarization

Yes

(INC) Item Name Code

60513

Date

Wed, Dec 23, 2020

Schedule B Code

8803909060

End Item Identification

aircraft support

Part Name Assigned By Controlling Agency

fuselage section

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0060513

Cross Reference

CAGE Codes

08664

Bristol Babcock Inc Instruments-Systems Div Sub of Babcock Intl Inc

U.s./canadian manufacturers

3SQS9

Aerovironment, Inc. Dba Aerovironment Inc

U.s./canadian manufacturers

65092

Solartron Electronics Inc Weston Instruments Div

U.s./canadian manufacturers

80254

Textron Lycoming Inc Williamsport Plant

U.s./canadian manufacturers

R1120

Satair A/s

Non-manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 1560-01-692-5791?

   The FSCG of the NSN 1560-01-692-5791 is 1560

2. Does the NSN 1560-01-692-5791 have a Schedule B code assigned?

   Yes, the Schedule B code is 8803909060

3. Does NSN 1560-01-692-5791 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 1560-01-692-5791 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 1560-01-692-5791 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 1560-01-692-5791 was assigned to the Federal Catalog?

   It was assigned 5 years ago, on Wed, Dec 23, 2020