NSN 75B790073-101

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

-54.0 celsius minimum and 115.0 celsius maximum operating temp rating, unable to decode contact voltage rating in volts, contact load current rating, 1 pole, single throw, normally open, momentary action nonpile-up contact arrangement, moisture resistant and vibration resistant hazardous locations/environmental protection.

NSN 5930-01-332-8037 Datasheet

(NSN) National Stock Number

5930-01-332-8037

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-332-8037

Requires Demilitarization

Yes

(INC) Item Name Code

35487

Date

Thu, Jan 17, 1991

Schedule B Code

8536509065

Contact Load Current Rating

Contact Voltage Rating In Volts

unable to decode

Hazardous Locations/Environmental Protection

moisture resistant and vibration resistant

Nonpile-Up Contact Arrangement

1 pole, single throw, normally open, momentary action

Operating Temp Rating

-54.0 celsius minimum and 115.0 celsius maximum

Overall Height

1.620 inches maximum

Overall Length

2.700 inches maximum

Overall Width

0.875 inches maximum

Style Designator

rectangular

Terminal Type

wire lead

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0035487

Cross Reference

CAGE Codes

76301

The Boeing Company Div Defense

U.s./canadian manufacturers

08748

Eldec Aerospace Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9065

Description

switches, for a voltage not exceeding 1000 volts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-332-8037?

   The FSCG of the NSN 5930-01-332-8037 is 5930

2. Does the NSN 5930-01-332-8037 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509065

3. Does NSN 5930-01-332-8037 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-332-8037 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5930-01-332-8037 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-332-8037 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Thu, Jan 17, 1991