NSN 75F6B2A224

"a device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. May include provisions for manual operation. At least one set of contacts must be in series with the actuating element(s). A combination of semiconductor and passive devices may be used in lieu of contacts. For automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). For items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. Excludes:circuit breaker box and magneto "breaker" assemblies. See also switch (as modified); and controller."

w/o mtg facilities terminal(s) on one surface body style, 0.220 microfarads single section capacitance value per section, 0.569 inches maximum body width, 1.130 inches maximum body length, 0.328 inches maximum body height.

NSN 5910-00-176-7693 Datasheet

(NSN) National Stock Number

5910-00-176-7693

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-176-7693

Requires Demilitarization

Yes

(INC) Item Name Code

00006

Date

Fri, Jan 23, 1970

Schedule B Code

8532250080

Body Height

0.328 inches maximum

Body Length

1.130 inches maximum

Body Style

w/o mtg facilities terminal(s) on one surface

Body Width

0.569 inches maximum

Capacitance Value Per Section

0.220 microfarads single section

Center To Center Distance Between Terminals Parallel To Length

0.995 inches minimum and 1.005 inches maximum

Dissipation Factor At Reference Temp In Percent

0.5000

Insulation Resistance At Reference Temp

250000.0 megohms

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

200.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Length

1.625 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Range Per Section

-5.00 to 5.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000006

Cross Reference

CAGE Codes

56699

Bc Components

U.s./canadian manufacturers

01002

General Electric Co Capacitors Div

U.s./canadian manufacturers

83298

Allied Signal Inc Aerospace Equipment Systems Eatontown Site

U.s./canadian manufacturers

64547

Honeywell International, Inc Div Aerospace-Tucson

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-25-0080

Description

fixed capacitors, dielectric of paper or plastic, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77866

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-176-7693?

   The FSCG of the NSN 5910-00-176-7693 is 5910

2. Does the NSN 5910-00-176-7693 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532250080

3. Does NSN 5910-00-176-7693 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-176-7693 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-176-7693 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-176-7693 was assigned to the Federal Catalog?

   It was assigned 56 years ago, on Fri, Jan 23, 1970