NSN 76-6009

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

nonpivoted actuator style, 1.187 inches nominal body height, 0.250 inches nominal actuator length, 0.375 inches nominal actuator height, 0.187 inches nominal actuator width.

NSN 5930-01-081-8567 Datasheet

(NSN) National Stock Number

5930-01-081-8567

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-081-8567

Requires Demilitarization

Yes

(INC) Item Name Code

00399

Date

Tue, Aug 21, 1979

Schedule B Code

8536509050

Actuator Height

0.375 inches nominal

Actuator Length

0.250 inches nominal

Actuator Style

nonpivoted

Actuator Width

0.187 inches nominal

Body Height

1.187 inches nominal

Body Length

1.375 inches nominal

Body Width

0.375 inches nominal

Body Style

hole mounted

Contact Load Current Rating At Maximum Rated Voltage

7.500 amperes resistive dc and 8.000 amperes resistive ac

Hazardous Locations/Environmental Protection

dustproof

Inclosure Type

fully inclosed

Maximum Voltage Rating In Volts

250.0 ac and 28.0 dc

Nonpile-Up Contact Arrangement

unable to decode

Terminal Type And Quantity

8 tab, solder lug

Unthreaded Mounting Hole Diameter

0.093 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000399

Cross Reference

CAGE Codes

04426

Illinois Tool Works Inc Dba Illinois Tool Works Inc Div Illinois Tool Works

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

8536-50-9050

Description

switches, slide, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-081-8567?

   The FSCG of the NSN 5930-01-081-8567 is 5930

2. Does the NSN 5930-01-081-8567 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509050

3. Does NSN 5930-01-081-8567 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-081-8567 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-01-081-8567 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-081-8567 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Tue, Aug 21, 1979