NSN 7632-003

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

1.870 inches nominal body height, 1.560 inches nominal body width, 10000.0 average life rating in hours, metal body material, 2.630 inches nominal body length.

NSN 5915-00-078-3252 Datasheet

(NSN) National Stock Number

5915-00-078-3252

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5915 - Filters and Networks

(NIIN) National Item Identification Number

00-078-3252

Requires Demilitarization

Yes

(INC) Item Name Code

60471

Date

Sat, Aug 5, 1967

Schedule B Code

8527995030

Average Life Rating In Hours

10000.0

Body Height

1.870 inches nominal

Body Length

2.630 inches nominal

Body Material

metal

Body Width

1.560 inches nominal

Discrimination At Specified Frequencies Per Function In Decibels

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.562 inches nominal

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

2.125 inches nominal

Frequency Band Width Per Function

Functional Terminal Type And Quantity

unable to decode

Inclosure Type

encased

Input Impedance Per Function W/Load

50.0 ohms blank

Insertion Loss At Reference Frequency Per Function In Decibels

unable to decode

Load Impedance Per Function

unable to decode

Mounting Facility Screw Thread Series Designator

unified national coarse (unc)

Mounting Facility Type And Quantity

2 threaded hole(s)

Nominal Thread Size

0.138 inches

Operating Temp Range

-55.0 to 65.0 celsius

Output Impedance Per Function W/Source Across Input

50.0 ohms blank

Overall Length

3.160 inches nominal

Principal Circuitry Type Per Function

unable to decode

Reference Frequency Per Function

unable to decode

Source Impedance Rating Per Function

unable to decode

Specified Frequencies Of Discrimination Per Function

1.00 hertz single low pass and 765.00 hertz single low pass and 1.53 kilohertz single low pass and 2.06 kilohertz single low pass

Style Designator

rectangular terminal/terminals on opposite surfaces

Vibration Resistance Range In Hertz

+10.0 to 55.0

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0060471

Cross Reference

CAGE Codes

96238

Dne Technologies, Inc

U.s./canadian manufacturers

33791

Electronic Precision Components Corp B G Electronics Div

U.s./canadian manufacturers

32840

Conolog Corporation Dba Iniven

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

657 - Instruments, electric meter

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8527-99-5030

Description

reception apparatus, nesoi

End Use

41210 - Stereo equipment, etc.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76289

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5915-00-078-3252?

   The FSCG of the NSN 5915-00-078-3252 is 5915

2. Does the NSN 5915-00-078-3252 have a Schedule B code assigned?

   Yes, the Schedule B code is 8527995030

3. Does NSN 5915-00-078-3252 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5915-00-078-3252 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5915-00-078-3252 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5915-00-078-3252 was assigned to the Federal Catalog?

   It was assigned 59 years ago, on Sat, Aug 5, 1967