NSN 77085458

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

0.090 inches nominal body width, 0.175 inches nominal body length, 4700.000 microfarads single section capacitance value per section, chip type body style, 0.050 inches nominal body height.

NSN 5910-01-348-9977 Datasheet

(NSN) National Stock Number

5910-01-348-9977

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-348-9977

Requires Demilitarization

Yes

(INC) Item Name Code

00007

Date

Tue, Nov 19, 1991

Schedule B Code

8532290040

Body Height

0.050 inches nominal

Body Length

0.175 inches nominal

Body Width

0.090 inches nominal

Body Style

chip type

Capacitance Value Per Section

4700.000 microfarads single section

Material

ceramic case

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

50.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Specification/Standard Data

28480-0160-6735 manufacturers specification control

Terminal Length

0.010 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 bonding pad

Tolerance Range Per Section

-10.00 to 10.00 percent single section

Voltage Temp Limits Per Section In Percent Capacitance Change

-15.0 to 15.0 without voltage applied single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000007

Cross Reference

CAGE Codes

1LQK8

Keysight Technologies, Inc.

U.s./canadian manufacturers

28480

Hewlett-Packard Company Dba Hp

U.s./canadian manufacturers

7ZXR5

Keysight Technologies Inc

U.s./canadian manufacturers

F0278

Thales Alenia Space France

Non-us manufacturer (nato), other foreign organization or codification bureaus

F6180

Nokia Networks France

Non-us manufacturer (nato), other foreign organization or codification bureaus

F6481

Thales Sa

Non-us manufacturer (nato), other foreign organization or codification bureaus

7J069

Tdk Corp of America

U.s./canadian manufacturers

51406

Murata Erie North America Inc Headquarters and Georgia Opns

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-348-9977?

   The FSCG of the NSN 5910-01-348-9977 is 5910

2. Does the NSN 5910-01-348-9977 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-348-9977 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-348-9977 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-348-9977 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-348-9977 was assigned to the Federal Catalog?

   It was assigned 34 years ago, on Tue, Nov 19, 1991