NSN 7954035

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.104 inches nominal body thickness, 0.250 inches minimum and 0.375 inches maximum corner radius, steel material, 5.937 inches nominal length, flat cross-sectional shape style.

NSN 5340-00-932-3501 Datasheet

(NSN) National Stock Number

5340-00-932-3501

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-932-3501

Requires Demilitarization

Yes

(INC) Item Name Code

29785

Date

Mon, Feb 13, 1967

Schedule B Code

7326908695

Body Thickness

0.104 inches nominal

Corner Radius

0.250 inches minimum and 0.375 inches maximum

Cross-Sectional Shape Style

flat

Length

5.937 inches nominal

Material

steel

Special Features

6 holes 0.187 in. dia,ctsk 82 deg angle

Securing Device Type

special

Width

5.469 inches nominal

Identification

Demilitarization Code

B - Usml items - mutilation to the point of scrap required worldwide. (note 7).

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9C - Defense supply center columbus, ohio 43215

Pseudo Item Name Code

0029785

Cross Reference

CAGE Codes

44674

The Oilgear Company Dba Jiffy Lube 213 Div Oilgear

U.s./canadian manufacturers

90303

Duracell Inc

U.s./canadian manufacturers

19207

U S Army Tank Automotive Command Amsta-Im-Mm

Government departments or units, including military organizations

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

Q - 70.0

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Schedule B & Trade

Schedule B

7326-90-8695

Description

other articles of iron or steel not wire nesoi

End Use

12300 - Finished metal shapes

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69969

(NAICS) North American Industrial Classification System

332999

Questions & Answers

1. What is the FSCG of the NSN 5340-00-932-3501?

   The FSCG of the NSN 5340-00-932-3501 is 5340

2. Does the NSN 5340-00-932-3501 have a Schedule B code assigned?

   Yes, the Schedule B code is 7326908695

3. Does NSN 5340-00-932-3501 require demilitarization?

   Usml items - mutilation to the point of scrap required worldwide. (note 7).

4. Does NSN 5340-00-932-3501 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5340-00-932-3501 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-00-932-3501 was assigned to the Federal Catalog?

   It was assigned 59 years ago, on Mon, Feb 13, 1967