NSN 7975X

An item designed to pass all frequencies below a specified frequency. Excludes:a single inductance, a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).

international harvester mdl mt122 end item identification, consists of steel sliding clutch,six blocker pins and springs,two brass synchromize plates; 3.525 in. o/a lg; 7.125 n. largest od; includes splined bore 3.704 in. major dia,25 teeth,,20 deg tooth pressure angle general characteristics item description.

NSN 2520-00-734-7587 Datasheet

(NSN) National Stock Number

2520-00-734-7587

(FSG) Federal Supply Group

25 - Vehicular Equipment Components

(FSC) Federal Supply Classification

2520 - Vehicular Power Transmission Components

(NIIN) National Item Identification Number

00-734-7587

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Tue, Jan 1, 1963

Schedule B Code

8483909500

End Item Identification

international harvester mdl mt122

General Characteristics Item Description

consists of steel sliding clutch,six blocker pins and springs,two brass synchromize plates; 3.525 in. o/a lg; 7.125 n. largest od; includes splined bore 3.704 in. major dia,25 teeth,,20 deg tooth pressure angle

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1601101

Cross Reference

CAGE Codes

89346

Navistar Intl Corp Truck Br Ohio Plant

U.s./canadian manufacturers

23862

Military Vehicles Opn General Motors Truck and Bus Group Ms 2603-02

U.s./canadian manufacturers

7X677

General Motors Llc Dba General Motors Llc

U.s./canadian manufacturers

SCY13

E.c.a Etablissement Centrald'approvisionnement des Forces Armee

Military standards and standards organizations (ex:stanags,milspecs,defstans)

14171

United States Gear Corp

U.s./canadian manufacturers

72447

Dana Commercial Vehicle Manufacturing, Llc Dba Dana Commercial Vehicle Products

Non-manufacturers

78500

Meritor Heavy Vehicle Systems, Llc

U.s./canadian manufacturers

95019

Dana Corp Spicer Transmission Div

U.s./canadian manufacturers

67049

Young Touchstone Company Div Young Touchstone

U.s./canadian manufacturers

82348

Du Pont E I de Nemours and Co Inc Dupont Printing and Publishing

U.s./canadian manufacturers

H0001

Daf Trucks N.v.

Non-us manufacturer (nato), other foreign organization or codification bureaus

19207

U S Army Tank Automotive Command Amsta-Im-Mm

Government departments or units, including military organizations

02413

Kersey / American Lafrance a Div of Figgie International Inc

U.s./canadian manufacturers

56442

Diamond Reo Truck Co

U.s./canadian manufacturers

98435

Marmon Group Inc the Active Gear Co Div

U.s./canadian manufacturers

31204

Perfection Clutch

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

08170

Water Commodity

586 - Vehicle parts, other than automobile

National Motor Freight Classification Item Number

019940

Schedule B & Trade

Schedule B

8483-90-9500

Description

parts, nesoi, of bearing housings & plain shaft bearings, housed bearings, clutches, universal joints, flywheels and transmission shafts

End Use

21180 - Industrial machines, other

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

74890

(NAICS) North American Industrial Classification System

333613

Questions & Answers

1. What is the FSCG of the NSN 2520-00-734-7587?

   The FSCG of the NSN 2520-00-734-7587 is 2520

2. Does the NSN 2520-00-734-7587 have a Schedule B code assigned?

   Yes, the Schedule B code is 8483909500

3. Does NSN 2520-00-734-7587 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 2520-00-734-7587 contain precious materials?

   Precious metal content is unknown

5. Does NSN 2520-00-734-7587 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 2520-00-734-7587 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963