NSN 7982519

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

3.625 inches nominal overall length, 1.375 inches nominal outside diameter, 1.000 inches nominal inside diameter, grip aid gripping surface condition, press fit mounting method.

NSN 5340-00-321-5933 Datasheet

(NSN) National Stock Number

5340-00-321-5933

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-321-5933

Requires Demilitarization

Yes

(INC) Item Name Code

13670

Date

Fri, Jun 14, 1968

Gripping Surface Condition

grip aid

Inside Diameter

1.000 inches nominal

Mounting Method

press fit

Outside Diameter

1.375 inches nominal

Overall Length

3.625 inches nominal

Style Designator

cylindrical

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

AKZ - Us army tank-automotive and armaments command warren, mi 48397-5000

Pseudo Item Name Code

0013670

Cross Reference

CAGE Codes

19207

U S Army Tank Automotive Command Amsta-Im-Mm

Government departments or units, including military organizations

60702

Cantrick Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

M - 85.0

National Motor Freight Class Rating

Z - No rating

Rail Variation

1

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

00000

Water Commodity

772 - Food sercive equipment, (mkt), field ranges, vacuum cans, beverage containers, etc

National Motor Freight Classification Item Number

000000

Questions & Answers

1. What is the FSCG of the NSN 5340-00-321-5933?

   The FSCG of the NSN 5340-00-321-5933 is 5340

2. Does NSN 5340-00-321-5933 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-00-321-5933 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5340-00-321-5933 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-00-321-5933 was assigned to the Federal Catalog?

   It was assigned 58 years ago, on Fri, Jun 14, 1968