NSN 7C27-14AA

A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also bushing, sleeve; spacer, sleeve; and washer (as modified). Excludes:pin, hollow.

unable to decode material, unable to decode material document and classification, 1.280 inches minimum and 1.320 inches maximum distance from loop center to tongue end, 0.840 inches minimum and 0.920 inches maximum overall width, 0.875 inches nominal loop inside diameter.

NSN 5340-01-332-7479 Datasheet

(NSN) National Stock Number

5340-01-332-7479

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-332-7479

Requires Demilitarization

Yes

(INC) Item Name Code

17532

Date

Wed, Jan 16, 1991

Distance From Loop Center To Tongue End

1.280 inches minimum and 1.320 inches maximum

Loop Inside Diameter

0.875 inches nominal

Material Document And Classification

unable to decode

Material

unable to decode

Overall Width

0.840 inches minimum and 0.920 inches maximum

Surface Treatment Document And Classification

unable to decode

Surface Treatment

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0017532

Cross Reference

CAGE Codes

71286

Howmet Global Fastening Systems Inc Div Camloc Products

U.s./canadian manufacturers

06481

Northrop Grumman Systems Corporation Div the Navigation, Targeting and Survivability Division

U.s./canadian manufacturers

13973

Litton Systems Inc. Div Navigation Systems Division

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 5340-01-332-7479?

   The FSCG of the NSN 5340-01-332-7479 is 5340

2. Does NSN 5340-01-332-7479 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-01-332-7479 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5340-01-332-7479 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-01-332-7479 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Wed, Jan 16, 1991