NSN 7F-254-2B

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

w/o mtg facilities, terminals on opposite surfaces body style, 0.390 inches nominal body height, 0.250 inches nominal body width, 0.250 microfarads single section capacitance value per section, 0.688 inches nominal body length.

NSN 5910-00-007-8013 Datasheet

(NSN) National Stock Number

5910-00-007-8013

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-007-8013

Requires Demilitarization

Yes

(INC) Item Name Code

31959

Date

Wed, Jul 12, 1972

Schedule B Code

8532290040

Terminal Type and Quantity

2 uninsulated wire lead

Terminal Surface Treatment

Solder

Dissipation Factor At Reference Temperature In Percent

1

Insulation Resistance At Reference Temperature

30000 megohm-microfarads

Body Style

Terminals on opposite surfaces without mounting facilities

Reliability Indicator

Not established

Body Length

0.688 inches

Terminal Length

At least 1.625 inches

Body Width

0.25 inches

Body Height

0.39 inches

Terminal Diameter

0.025 inches

Schematic Diagram Designator

No common or grounded electrode(s)

Capacitance Value Per Section

0.25 microfarads single section

Nonderated Continuous Voltage Rating and Type Per Section

200 dc single section

Tolerance Range Per Section

-10 to +10 percent single section

Case Material

Plastic

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0031959

Cross Reference

CAGE Codes

11447

L3 Technologies, Inc. Div Communication Systems-East

U.s./canadian manufacturers

49671

Lockheed Martin Corporation Dba Lockheed Martin Div Lockheed Martin

U.s./canadian manufacturers

54904

Industrial/midwec Capacitor Corp a Charles Industries Co

U.s./canadian manufacturers

84411

American Shizuki Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-007-8013?

   The FSCG of the NSN 5910-00-007-8013 is 5910

2. Does the NSN 5910-00-007-8013 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-00-007-8013 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-007-8013 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-007-8013 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-007-8013 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Wed, Jul 12, 1972

7. What is the terminal length of nsn 5910-00-007-8013?

   At least 1.625 inches

8. What is the terminal length of nsn 5910-00-007-8013?

   At least 1.625 inches

9. What is the terminal length of nsn 5910-00-007-8013?

   At least 1.625 inches