NSN 7G7014

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

2520-01-607-5712, vehicular universal joint yoke.

NSN 2520-01-607-5712 Datasheet

(NSN) National Stock Number

2520-01-607-5712

(FSG) Federal Supply Group

25 - Vehicular Equipment Components

(FSC) Federal Supply Classification

2520 - Vehicular Power Transmission Components

(NIIN) National Item Identification Number

01-607-5712

Requires Demilitarization

Yes

(INC) Item Name Code

52120

Date

Fri, Jun 8, 2012

Schedule B Code

8483909500

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0052120

Cross Reference

CAGE Codes

11083

Caterpillar Inc Div Caterpillar Defense

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

8483-90-9500

Description

parts, nesoi, of bearing housings & plain shaft bearings, housed bearings, clutches, universal joints, flywheels and transmission shafts

End Use

21180 - Industrial machines, other

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

74890

(NAICS) North American Industrial Classification System

333613

Questions & Answers

1. What is the FSCG of the NSN 2520-01-607-5712?

   The FSCG of the NSN 2520-01-607-5712 is 2520

2. Does the NSN 2520-01-607-5712 have a Schedule B code assigned?

   Yes, the Schedule B code is 8483909500

3. Does NSN 2520-01-607-5712 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 2520-01-607-5712 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 2520-01-607-5712 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 2520-01-607-5712 was assigned to the Federal Catalog?

   It was assigned 14 years ago, on Fri, Jun 8, 2012