NSN 80171100000

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The items must have inherent characteristics of inducing little or no self-inductance. Opposition to current flowo s an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes:suppressor, ignition interference. See also resistor (1), fixentewire wound, inductive.

0.280 inches minimum and 0.310 inches maximum body width, solid anode type, 0.100 inches minimum and 0.130 inches maximum body height, w/o mtg facilities terminal(s) on one surface body style, 0.200 inches minimum and 0.230 inches maximum body length.

NSN 5910-01-232-3347 Datasheet

(NSN) National Stock Number

5910-01-232-3347

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-232-3347

Requires Demilitarization

Yes

(INC) Item Name Code

00008

Date

Sun, May 11, 1986

Schedule B Code

8532290040

Anode Type

solid

Body Height

0.100 inches minimum and 0.130 inches maximum

Body Length

0.200 inches minimum and 0.230 inches maximum

Body Width

0.280 inches minimum and 0.310 inches maximum

Body Style

w/o mtg facilities terminal(s) on one surface

Capacitance Value Per Section

10.000 microfarads single section

Capacitive Electrode Material

tantalum

Center To Center Distance Between Terminals Parallel To Length

0.200 inches nominal

Dc Leakage At Reference Temp

3.000 microamperes

Dissipation Factor At Reference Temp In Percent

6.000

Electrical Polarization

polarized

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

25.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Specification/Standard Data

81349-mil-c-49137/6 government specification

Terminal Diameter

0.016 inches nominal

Terminal Length

1.000 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

"81349-mil-c-49137 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-10.00 to 10.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000008

Cross Reference

CAGE Codes

A3489

Plessey Spa

Non-us manufacturer (nato), other foreign organization or codification bureaus

K0668

Leonardo Uk Ltd

Non-us manufacturer (nato), other foreign organization or codification bureaus

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-232-3347?

   The FSCG of the NSN 5910-01-232-3347 is 5910

2. Does the NSN 5910-01-232-3347 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-232-3347 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-232-3347 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-232-3347 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-232-3347 was assigned to the Federal Catalog?

   It was assigned 40 years ago, on Sun, May 11, 1986