NSN 80213

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

1610-00-305-5345, brush bracket assy.

NSN 1610-00-305-5345 Datasheet

(NSN) National Stock Number

1610-00-305-5345

(FSG) Federal Supply Group

16 - Aerospace Craft Components and Accessories

(FSC) Federal Supply Classification

1610 - Aircraft Propellers and Components

(NIIN) National Item Identification Number

00-305-5345

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Tue, Jan 1, 1963

Schedule B Code

8803100060

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

1068939

Cross Reference

CAGE Codes

00929

Microlab/fxr Llc

U.s./canadian manufacturers

73030

Hamilton Sundstrand Corporation Dba Collins Aerospace

U.s./canadian manufacturers

95201

Napco International Llc Dba Napco International Inc

U.s./canadian manufacturers

56501

Abb Installation Products Inc

U.s./canadian manufacturers

59789

Proponent, Inc. Dba Proponent

U.s./canadian manufacturers

70210

Honeywell International Inc. Div Aerospace - Torrance

U.s./canadian manufacturers

72599

Alliedsignal Inc Dba Allied-Signal Aerospace Co

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

U - 50.0

National Motor Freight Class Rating

U - 50.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

53880

Water Commodity

574 - Iron or steel, structural, (less than 35 feet)(see 825)

National Motor Freight Classification Item Number

104600

Questions & Answers

1. What is the FSCG of the NSN 1610-00-305-5345?

   The FSCG of the NSN 1610-00-305-5345 is 1610

2. Does the NSN 1610-00-305-5345 have a Schedule B code assigned?

   Yes, the Schedule B code is 8803100060

3. Does NSN 1610-00-305-5345 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 1610-00-305-5345 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 1610-00-305-5345 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 1610-00-305-5345 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963