NSN 8030000748

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

unable to decode coil form type, unable to decode inductance rating, open inclosure type, 0.340 inches maximum body outside diameter, 0.187 inches maximum body length.

NSN 5950-00-006-7705 Datasheet

(NSN) National Stock Number

5950-00-006-7705

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-006-7705

Requires Demilitarization

Yes

(INC) Item Name Code

00777

Date

Fri, Jun 30, 1972

Schedule B Code

8548900100

Mounting Method

Terminal single group

Turn Quantity

30 single component single primary

Inductance Rating

0.33 microhenries single component single secondary

Inductance Rating

0.71 microhenries single component single primary

Body Length

up to 0.187 inches

Coil Form Type

Solid single component

Body Outside Diameter

up to 0.34 inches

Winding Function and Quantity

1 primary single component and 1 secondary single component

Inclosure Type

Open

Terminal Type and Quantity

5 wire lead

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000777

Cross Reference

CAGE Codes

12856

Micrometals Inc

U.s./canadian manufacturers

57057

Navcom Defense Electronics, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-00-006-7705?

   The FSCG of the NSN 5950-00-006-7705 is 5950

2. Does the NSN 5950-00-006-7705 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5950-00-006-7705 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-00-006-7705 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5950-00-006-7705 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-00-006-7705 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Fri, Jun 30, 1972

7. What is the body length of nsn 5950-00-006-7705?

   up to 0.187 inches

8. What is the body length of nsn 5950-00-006-7705?

   up to 0.187 inches

9. What is the body length of nsn 5950-00-006-7705?

   up to 0.187 inches