NSN 811E1139

4.985 inches minimum and 4.995 inches maximum first end distance from bearing seat to end, 0.942 inches minimum and 0.952 inches maximum first end bearing seat width, locking device groove first end engaging/locking/positioning facility, 2.125 inches minimum and 2.127 inches maximum first end bearing seat diameter, included first end bearing seat.

NSN 2520-00-734-6985 Datasheet

(NSN) National Stock Number

2520-00-734-6985

(FSG) Federal Supply Group

25 - Vehicular Equipment Components

(FSC) Federal Supply Classification

2520 - Vehicular Power Transmission Components

(NIIN) National Item Identification Number

00-734-6985

Requires Demilitarization

Yes

(INC) Item Name Code

10852

Date

Tue, Jan 1, 1963

Schedule B Code

8483909500

First End Bearing Seat Diameter

2.125 inches minimum and 2.127 inches maximum

First End Bearing Seat Width

0.942 inches minimum and 0.952 inches maximum

First End Bearing Seat

included

First End Distance From Bearing Seat To End

4.985 inches minimum and 4.995 inches maximum

First End Engaging/Locking/Positioning Facility

locking device groove

First End Facility Location

0.375 in. from shaft end

First End Facility Diameter

1.695 inches minimum and 1.700 inches maximum

First End Facility Width

0.156 inches nominal

First End Spline Minor Diameter

1.949 inches minimum and 1.961 inches maximum

First End Spline Quantity

16

First End Spline Type

straight

First End Spline Length

2.719 inches nominal

First End Spline Major Diameter

2.122 inches minimum and 2.127 inches maximum

First End Type

splined

Material Document And Classification

aisi 4150h assn std single material response or sae 4150h assn std single material response

Material

steel comp 4150h

Metallic Hardness Rating

39.0 minimum rockwell c and 43.0 maximum rockwell c

Overall Length

28.688 inches nominal

Second End Bearing Seat

not included

Second End Spline Length

2.000 inches nominal

Second End Spline Major Diameter

2.122 inches minimum and 2.127 inches maximum

Second End Spline Minor Diameter

1.949 inches minimum and 1.961 inches maximum

Second End Spline Quantity

16

Second End Spline Type

straight

Second End Type

splined

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0010852

Cross Reference

CAGE Codes

SCY13

E.c.a Etablissement Centrald'approvisionnement des Forces Armee

Military standards and standards organizations (ex:stanags,milspecs,defstans)

19207

U S Army Tank Automotive Command Amsta-Im-Mm

Government departments or units, including military organizations

02413

Kersey / American Lafrance a Div of Figgie International Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

S - 60.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

08190

Water Commodity

72C - Tacticle vehicles, repair parts, parts, components and test/tool sets and equipment

National Motor Freight Classification Item Number

017900

Schedule B & Trade

Schedule B

8483-90-9500

Description

parts, nesoi, of bearing housings & plain shaft bearings, housed bearings, clutches, universal joints, flywheels and transmission shafts

End Use

21180 - Industrial machines, other

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

74890

(NAICS) North American Industrial Classification System

333613

Questions & Answers

1. What is the FSCG of the NSN 2520-00-734-6985?

   The FSCG of the NSN 2520-00-734-6985 is 2520

2. Does the NSN 2520-00-734-6985 have a Schedule B code assigned?

   Yes, the Schedule B code is 8483909500

3. Does NSN 2520-00-734-6985 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 2520-00-734-6985 contain precious materials?

   Precious metal content is unknown

5. Does NSN 2520-00-734-6985 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 2520-00-734-6985 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963