NSN 8120S

An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector or printed wiring board. It is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. Excludes:lampholder; jack,telephone; jack,tip; insert electrical connector; insert module,electrical connector; connector body (as modified) and socket,plug-in electronic components. See also wiring harness (as modified) and cable assembly (as modified). For items with termination wires of more than four inches in length, see lead assembly,electrical. For items without inserts, see shell,electrical connector.

1 shaft and 1 knob w/dial adjustment device type and quantity, 10.0 attenuation per step in decibels, transmission line application design, stepped attenuation variation method, coaxial type body style.

NSN 5985-01-461-1538 Datasheet

(NSN) National Stock Number

5985-01-461-1538

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

01-461-1538

Requires Demilitarization

Yes

(INC) Item Name Code

00838

Date

Tue, Dec 1, 1998

Schedule B Code

8529109000

Adjustment Device Type And Quantity

1 shaft and 1 knob w/dial

Application Design

transmission line

Attenuation Per Step In Decibels

10.0

Attenuation Variation Method

stepped

Body Style

coaxial type

Coaxial Connector Series Designation

sma

Frequency Range

0.000 gigahertz minimum and 2.000 gigahertz maximum

Impedance Rating In Ohms

50.0 input-output

Insertion Loss At Minimum Attenuation In Maximum Decibels

0.2

Mounting Facility Nominal Screw Thread Diameter

0.138 inches

Mounting Facility Pattern

four position diamond

Mounting Facility Screw Thread Series Designator

unified national coarse (unc)

Mounting Facility Type And Quantity

4 threaded hole(s)

Mounting Thread Quantity

32 per inch

Operating Temp Range

-55.0 to 85.0 celsius

Overall Attenuation Accuracy In Decibels

-1.60 to 1.60

Overall Attenuation Range In Decibels

+0.0 to 100.0

Overall Height

2.120 inches nominal

Overall Length

3.220 inches nominal

Overall Width

1.310 inches nominal

Power Rating

3.0 watts average and 1000.0 watts peak

Segment Attenuation Accuracy In Decibels

-0.30 to 0.30 and -0.50 to 0.50 and -0.70 to 0.70 and -0.80 to 0.80 and -1.00 to 1.00 and -1.20 to 1.20 and -1.30 to 1.30 and -1.40 to 1.40 and -1.50 to 1.50 and -1.60 to 1.60

Segment Attenuation Range In Decibels

+0.00 to 10.00 and +10.00 to 20.00 and +20.00 to 30.00 and +30.00 to 40.00 and +40.00 to 50.00 and +50.00 to 60.00 and +60.00 to 70.00 and +70.00 to 80.00 and +80.00 to 90.00 and +90.00 to 100.00

Shaft Diameter

0.250 inches nominal

Shaft Type

round

Shaft Length

0.620 inches nominal

Special Features

max 0.250 in. mounting panel thickness; 30 deg angle between steps; finish is chemical film over aluminum per mil-c-5541; color clear

Step Position Quantity

10

Terminal Type And Quantity

2 connector, coaxial, male

Voltage Standing Wave Ratio

1.30

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000838

Cross Reference

CAGE Codes

04423

Telonic Berkeley, Inc. Dba Telonic Berkeley

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

8529-10-9000

Description

antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8524 to 8528, nesoi

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76493

(NAICS) North American Industrial Classification System

334220

Questions & Answers

1. What is the FSCG of the NSN 5985-01-461-1538?

   The FSCG of the NSN 5985-01-461-1538 is 5985

2. Does the NSN 5985-01-461-1538 have a Schedule B code assigned?

   Yes, the Schedule B code is 8529109000

3. Does NSN 5985-01-461-1538 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5985-01-461-1538 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5985-01-461-1538 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-01-461-1538 was assigned to the Federal Catalog?

   It was assigned 27 years ago, on Tue, Dec 1, 1998