NSN 8127-445A

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

0.100 inches minimum and 0.106 inches maximum cross-sectional height, hardness rating, unable to decode material document and classification, o-ring cross-sectional shape style, 1.418 inches minimum and 1.430 inches maximum center hole diameter.

NSN 5330-01-025-1911 Datasheet

(NSN) National Stock Number

5330-01-025-1911

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5330 - Packing and Gasket Materials

(NIIN) National Item Identification Number

01-025-1911

Requires Demilitarization

Yes

(INC) Item Name Code

04521

Date

Wed, Jul 28, 1976

Schedule B Code

3926904500

Center Hole Diameter

1.418 inches minimum and 1.430 inches maximum

Cross-Sectional Height

0.100 inches minimum and 0.106 inches maximum

Cross-Sectional Shape Style

o-ring

Hardness Rating

Material Document And Classification

unable to decode

Material

unable to decode

Temp Rating

-55.0 fahrenheit and 3000.0 fahrenheit

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0004521

Cross Reference

CAGE Codes

07322

Minnesota Rubber Co

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

3926-90-4500

Description

gaskets,washers & other seals

End Use

12770 - Other industrial supplies

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

89399

(NAICS) North American Industrial Classification System

339991

Questions & Answers

1. What is the FSCG of the NSN 5330-01-025-1911?

   The FSCG of the NSN 5330-01-025-1911 is 5330

2. Does the NSN 5330-01-025-1911 have a Schedule B code assigned?

   Yes, the Schedule B code is 3926904500

3. Does NSN 5330-01-025-1911 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5330-01-025-1911 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5330-01-025-1911 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5330-01-025-1911 was assigned to the Federal Catalog?

   It was assigned 50 years ago, on Wed, Jul 28, 1976