NSN 817845

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

kit consists of 1 carbon pile p/n 128203,1 ea contact plug p/n 126738 and 817694-1;nha regulator,voltage 6110009976055,p/n 1589-1-e general characteristics item description.

NSN 6110-00-476-1215 Datasheet

(NSN) National Stock Number

6110-00-476-1215

(FSG) Federal Supply Group

61 - Electric Wire, and Power and Distribution Equipment

(FSC) Federal Supply Classification

6110 - Electrical Control Equipment

(NIIN) National Item Identification Number

00-476-1215

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Tue, Jan 1, 1963

General Characteristics Item Description

kit consists of 1 carbon pile p/n 128203,1 ea contact plug p/n 126738 and 817694-1;nha regulator,voltage 6110009976055,p/n 1589-1-e

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

FHZ - Oklahoma city air logistics center 3001 staff drive tinker afb, ok 73145-3303

Pseudo Item Name Code

1323715

Cross Reference

CAGE Codes

64547

Honeywell International, Inc Div Aerospace-Tucson

U.s./canadian manufacturers

83298

Allied Signal Inc Aerospace Equipment Systems Eatontown Site

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

Q - 70.0

National Motor Freight Class Rating

W - Rating variable

Rail Variation

1

Special Handling

Z - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 6110-00-476-1215?

   The FSCG of the NSN 6110-00-476-1215 is 6110

2. Does NSN 6110-00-476-1215 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 6110-00-476-1215 contain precious materials?

   Precious metal content is unknown

4. Does NSN 6110-00-476-1215 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 6110-00-476-1215 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963