NSN 820-209F

A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see gearshaft (as modified). For items designed to support rotating members see axle(1), straight. For items not having the above conditions see pin, straight, headless. For items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.

2 threaded stud circuit attachment method and quantity, unable to decode accuracy in percent, black single indicator all ranges background color, 1.880 inches nominal center to center distance between mounting facilities parallel to width, 1.880 inches nominal center to center distance between mounting facilities parallel to length.

NSN 6625-01-237-2412 Datasheet

(NSN) National Stock Number

6625-01-237-2412

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6625 - Electrical and Electronic Properties Measuring and Testing Instruments

(NIIN) National Item Identification Number

01-237-2412

Requires Demilitarization

Yes

(INC) Item Name Code

16476

Date

Sun, Jul 27, 1986

Schedule B Code

9030908030

Accuracy In Percent

unable to decode

Background Color

black single indicator all ranges

Center To Center Distance Between Mounting Facilities Parallel To Length

1.880 inches nominal

Center To Center Distance Between Mounting Facilities Parallel To Width

1.880 inches nominal

Circuit Attachment Method And Quantity

2 threaded stud

Circuit Current For Which Designed

dc

Dial Scale Marking Color

unable to decode

Features Provided

magnetic shield and zero adjuster

Indicator Type

dial w/pointer

Installation Design

panel

Material

plastic

Meter Body Diameter Behind Mounting Flange

2.140 inches nominal

Meter Depth Behind Mounting Flange

1.300 inches nominal

Mounting Arrangement Style

four hole/stud rectangular/square

Mounting Facility Type And Quantity

4 threaded stud(s)

Movement Suspension Method

taut band

Movement Type

moving coil, permanent magnet

Mounting Stud Diameter

0.112 inches nominal

Mounting Stud Length

0.500 inches nominal

Nuclear Hardness Critical Feature

nonhardened

Overall Height

2.270 inches nominal

Overall Length

2.200 inches nominal

Overall Width

2.990 inches nominal

Pointer Color

unable to decode

Scale Marking

amplitude; lower range: 0; 1; 2; 3; upper range: 0; 2; 4; 6; 8; 10

Scale Division Quantity

unable to decode

Scale Graduation Type

unable to decode

Sensitivity Rating

500.0 microamperes

Special Features

135 ohms coil resistance

Special Markings

extended line marked battery ok at 7 on upper range

Style Designator

rectangular flush mtg

Supplementary Features

1.5 pct tracking; vertical mtg

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0016476

Cross Reference

CAGE Codes

32171

Crompton Modutec Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

H - 110.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

00000

Water Commodity

657 - Instruments, electric meter

National Motor Freight Classification Item Number

136750

Schedule B & Trade

Schedule B

9030-90-8030

Description

parts and accessories of articles of schedule b subheading 9030.39

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

87479

(NAICS) North American Industrial Classification System

334515

Questions & Answers

1. What is the FSCG of the NSN 6625-01-237-2412?

   The FSCG of the NSN 6625-01-237-2412 is 6625

2. Does the NSN 6625-01-237-2412 have a Schedule B code assigned?

   Yes, the Schedule B code is 9030908030

3. Does NSN 6625-01-237-2412 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6625-01-237-2412 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6625-01-237-2412 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6625-01-237-2412 was assigned to the Federal Catalog?

   It was assigned 40 years ago, on Sun, Jul 27, 1986