NSN 82275-1

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

hardness rating, 0.734 inches minimum and 0.766 inches maximum fastener length, 0.211 inches minimum and 0.221 inches maximum first diameter from head, 0.100 inches minimum and 0.160 inches maximum distance from largest bearing surface of head to end of first diameter, 0.244 inches minimum and 0.250 inches maximum head diameter.

NSN 5306-00-914-2736 Datasheet

(NSN) National Stock Number

5306-00-914-2736

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5306 - Bolts

(NIIN) National Item Identification Number

00-914-2736

Requires Demilitarization

Yes

(INC) Item Name Code

06666

Date

Fri, Jan 1, 1960

Schedule B Code

7318152000

Distance From Largest Bearing Surface Of Head To End Of First Diameter

0.100 inches minimum and 0.160 inches maximum

Fastener Length

0.734 inches minimum and 0.766 inches maximum

First Diameter From Head

0.211 inches minimum and 0.221 inches maximum

Hardness Rating

Head Diameter

0.244 inches minimum and 0.250 inches maximum

Head Height

0.365 inches minimum and 0.375 inches maximum

Head Style

flat chamfer

Hole Configuration Style

round

Hole Diameter

0.062 inches nominal

Hole Quantity

6

Hole Type

drilled

Internal Drive Style

hexagon

Material Document And Classification

unable to decode

Material

unable to decode

Nominal Thread Diameter

0.250 inches

Surface Treatment

unable to decode

Thread Class

3a

Thread Direction

right-hand

Thread Length

0.606 inches minimum and 0.634 inches maximum

Thread Quantity Per Inch

20

Thread Series Designator

unified national coarse (unc)

Width Across Flats

0.188 inches minimum and 0.190 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0006666

Cross Reference

CAGE Codes

11599

Triumph Engine Control Systems Llc

Non-manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

48950

Water Commodity

573 - Bolts or nuts (iron or steel),(less than 35 feet)

National Motor Freight Classification Item Number

093486

Schedule B & Trade

Schedule B

7318-15-2000

Description

bolts and bolts and their nuts or washers exported in the same shipment

End Use

12110 - Iron and steel products, other

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69421

(NAICS) North American Industrial Classification System

332722

Questions & Answers

1. What is the FSCG of the NSN 5306-00-914-2736?

   The FSCG of the NSN 5306-00-914-2736 is 5306

2. Does the NSN 5306-00-914-2736 have a Schedule B code assigned?

   Yes, the Schedule B code is 7318152000

3. Does NSN 5306-00-914-2736 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5306-00-914-2736 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5306-00-914-2736 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5306-00-914-2736 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960