NSN 82512200031

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

5340-01-381-6482, dust and moistur protective plug.

NSN 5340-01-381-6482 Datasheet

(NSN) National Stock Number

5340-01-381-6482

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-381-6482

Requires Demilitarization

Yes

(INC) Item Name Code

13434

Date

Thu, Oct 21, 1993

Schedule B Code

3926904500

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0013434

Cross Reference

CAGE Codes

Z07X0

Rheinmetall Man Military Vehicles Australia Pty Ltd

Non-us manufacturer (nato), other foreign organization or codification bureaus

D3273

Man Truck & Bus Se

Non-us manufacturer (nato), other foreign organization or codification bureaus

39428

Mcmaster-Carr Supply Co

Non-manufacturers

78JK3

Parker-Hannifin Corporation Dba Pneutronics Div Quick Coupling Division

U.s./canadian manufacturers

97111

Parker-Hannifin Corporation Div Quick Coupling Division

U.s./canadian manufacturers

Z1034

Parker Hannifin (australia) Pty. Limited

Non-us manufacturer (nato), other foreign organization or codification bureaus

Z19M6

Enzed Albury Shargue Enterprises Pty Ltd

Non-manufacturers

D8134

Parker Hannifin Gmbh -Geschaftsbereich Ermeto-

Non-us manufacturer (nato), other foreign organization or codification bureaus

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Schedule B & Trade

Schedule B

3926-90-4500

Description

gaskets,washers & other seals

End Use

12770 - Other industrial supplies

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

89399

(NAICS) North American Industrial Classification System

339991

Questions & Answers

1. What is the FSCG of the NSN 5340-01-381-6482?

   The FSCG of the NSN 5340-01-381-6482 is 5340

2. Does the NSN 5340-01-381-6482 have a Schedule B code assigned?

   Yes, the Schedule B code is 3926904500

3. Does NSN 5340-01-381-6482 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-01-381-6482 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5340-01-381-6482 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-01-381-6482 was assigned to the Federal Catalog?

   It was assigned 32 years ago, on Thu, Oct 21, 1993