NSN 8280-4

An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. Excludes:bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.

single pole type body style, 2.000 inches nominal body length, reset actuator function, at pole one actuator position designation, 0.620 inches nominal body width.

NSN 5925-00-232-3256 Datasheet

(NSN) National Stock Number

5925-00-232-3256

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

00-232-3256

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Mon, Oct 19, 1970

Schedule B Code

8536200040

Actuator Function

reset

Actuator Position Designation

at pole one

Body Length

2.000 inches nominal

Body Style

single pole type

Body Width

0.620 inches nominal

Center To Center Distance Between Terminals Parallel To Length

1.050 inches nominal

Circuit Protection Type

overcurrent all locations

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

1.590 inches nominal

Fragility Factor

moderately rugged

Frequency In Hertz

60.0 single location

Inclosure Protection Type For Which Designed

general purpose

Manual Actuator Type And Quantity

1 push button

Material

plastic case

Maximum Continuous Load Current Rating Per Pole

8.0 amperes ac single location

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

1000.0 ac single location

Mounting Facility Type And Quantity

2 unthreaded hole(s)

Mounting Surface To Terminal End Distance

1.045 inches nominal

Operating Voltage Type And Rating Per Pole In Volts

12.0 ac single location

Pole Quantity

1

Reset Method

automatic

Special Handling Feature

magnetic

Storage Type

general purpose warehouse

Terminal Type And Quantity

2 pin

Trip Release Ambient Temp Rating

25.0 celsius nominal single location

Trip Release Characteristic

instantaneous single location

Trip Release Method

thermal-magnetic single location

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

125.0 single location

Unthreaded Mounting Hole Diameter

0.219 inches minimum and 0.229 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

74382

Triple a Specialty Co

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-00-232-3256?

   The FSCG of the NSN 5925-00-232-3256 is 5925

2. Does the NSN 5925-00-232-3256 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-00-232-3256 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-00-232-3256 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-00-232-3256 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-00-232-3256 was assigned to the Federal Catalog?

   It was assigned 55 years ago, on Mon, Oct 19, 1970