NSN 82A5052A2012

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

0.375 inches nominal distance from center of mounting hole to edge along the width, 1.500 inches nominal block height, 2.876 inches nominal center to center distance between first and second mounting holes, 1 clamping hole quantity, unable to decode clamping hole diameter.

NSN 5340-01-342-2809 Datasheet

(NSN) National Stock Number

5340-01-342-2809

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-342-2809

Requires Demilitarization

Yes

(INC) Item Name Code

39404

Date

Thu, Jul 18, 1991

Schedule B Code

7307110060

Block Height

1.500 inches nominal

Center To Center Distance Between First And Second Mounting Holes

2.876 inches nominal

Clamping Hole Diameter

unable to decode

Clamping Hole Quantity

1

Distance From Center Of Mounting Hole To Edge Along The Width

0.375 inches nominal

Distance From End To First Clamping Hole Center

1.875 inches nominal

Distance From End To First Mounting Hole Center

0.437 inches nominal

Material Document And Classification

astm a108 assn std single material response

Material

steel comp 1018

Mounting Facility

unthreaded hole(s)

Mounting Hole Quantity

2

Mounting Hole Diameter

0.421 inches minimum and 0.428 inches maximum

Overall Length

3.750 inches nominal

Overall Width

0.750 inches nominal

Style Designator

rectangular

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0039404

Cross Reference

CAGE Codes

01365

Marine Corps Systems Command Div Marine Corps Systems Command Technical Data Repository Customer Service

Government departments or units, including military organizations

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Schedule B & Trade

Schedule B

7307-11-0060

Description

cast fittings of nonmalleable cast iron nesoi

End Use

12110 - Iron and steel products, other

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

67951

(NAICS) North American Industrial Classification System

331511

Questions & Answers

1. What is the FSCG of the NSN 5340-01-342-2809?

   The FSCG of the NSN 5340-01-342-2809 is 5340

2. Does the NSN 5340-01-342-2809 have a Schedule B code assigned?

   Yes, the Schedule B code is 7307110060

3. Does NSN 5340-01-342-2809 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-01-342-2809 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5340-01-342-2809 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-01-342-2809 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Thu, Jul 18, 1991