Request Pricing & Availability

NSN: 5306-00-001-4860
Part Number(s):
Name & Email:
Order Terms | Privacy Policy    

Part Numbers

Item Number Item Description
8331195 Bolt, Eye

Master Requirement Codes

Code Translation
AATK The length of a straight line which passes through the center of the eye and terminates at the inner periphery.
MATT The chemical compound or mechanical mixture properties of which the item is fabricated.
AHYM The nominal length of a straight line which passes through the center of the threaded portion, and terminates at the circumference.
MDCL The specification, standard, or manufacturers reference, and the classification designation, such as class, condition, temper, and the like, that identifies the material.
AATR A measurement of the longest dimension of the shank, in distinction from width.
ABHP The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
STYL The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
AAJD A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
AAJF The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
AASA A measurement of the extent of threads, including incomplete threads, along a line parallel to the longitudinal axis.
CMLP The number of threads on the item per linear inch measured on a line parallel to the thread axis.
THSD A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

8331195 Eye Bolt

Cage 19207

Technical Definition

Bolt, Eye, also referenced with federal logistics item name code 01853 - An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. see also bolt, hook. excludes connector, rod end.

Technical Characteristics

Distance From Center Of Eye To Shank End (CRHT):
4.120 inches nominal
Eye Inside Diameter (AATK):
0.960 inches minimum and 1.000 inches maximum
Eye Stock Diameter (AATZ):
0.440 inches nominal
Material (MATT):
Steel comp 1015 overall or steel comp 1016 overall or steel comp 1018 overall or steel comp 1020 overall or steel comp 1022 overall or steel comp 1025 overall
Nominal Thread Diameter (AHYM):
0.500 inches
Material Document And Classification (MDCL):
Astm a108 assn std all material responses overall
Shank Length (AATR):
3.180 inches nominal
Overall Length (ABHP):
5.060 inches nominal
Style Designator (STYL):
Round, closed
Thread Class (AAJD):
Thread Direction (AAJF):
Thread Length (AASA):
1.060 inches minimum and 1.180 inches maximum
Thread Quantity Per Inch (CMLP):
Thread Series Designator (THSD):

National Stock Number (NSN)